The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 5 of 7

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- projects and builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=197)

- - Jason's Bagged Farm Truck (https://67-72chevytrucks.com/vboard/showthread.php?t=630982)

jdoisher

07-10-2014 08:11 AM

Re: Jason's Bagged Farm Truck

Quote:

Originally Posted by boonedogs72 (Post 6754939)

What did you use to cut the housing?

A 4" cut off wheel.

Quote:

Originally Posted by Monte's62 (Post 6755093)

Jason, on your pancaked crossmember I have seen many on here before and I assume everyone is trying to get the max amount, but I have missed exactly what the depth of the cut actually is. It looks to be 1 to 1 1/2 inches. Can you tell me what that measure is. Thanks again and great job on the truck... Again.

I'm not sure of the question, but a total of two inches are taken out of the center.

boonedogs72

07-10-2014 11:15 AM

Re: Jason's Bagged Farm Truck

Wow looks perfect for using a cutoff wheel.

SCOTI

07-10-2014 05:51 PM

Re: Jason's Bagged Farm Truck

Quote:

Originally Posted by boonedogs72 (Post 6755486)

Wow looks perfect for using a cutoff wheel.

My thought as well. I never can get a true 90° cut. I try to clean things up as much as possible after but never seem to be able to keep things truely square.

Monte's62

07-10-2014 11:01 PM

Re: Jason's Bagged Farm Truck

Thanks lowlife3. I appreciate the tip!!!

jdoisher

07-11-2014 08:04 AM

Re: Jason's Bagged Farm Truck

Quote:

Originally Posted by SCOTI (Post 6755919)

My thought as well. I never can get a true 90° cut. I try to clean things up as much as possible after but never seem to be able to keep things truely square.

After cutting the axle tube and squaring it up I beveled the tubes and welded it with a 210MVP, turned way up!!
Jason

darkhorse970

07-11-2014 08:42 AM

Re: Jason's Bagged Farm Truck

Very nice work, I am following along.

Mattyparty

07-20-2014 11:18 PM

Re: Jason's Bagged Farm Truck

Subscribed!!!

jdoisher

07-23-2014 03:26 PM

Re: Jason's Bagged Farm Truck

1 Attachment(s)

Attachment 1281430
My latest Instagram post!! I didn't take any pictures of assembly but you get the idea. I bought Porterbuilt control arms for this truck (went ahead and bought a set for her truck too!!) they are 1" forward and 1" shorter (nice parts by the way!!) and his pan hard rod kit. Also got a disc brake kit with 2 1/2 dropped spindles. Was able to get most of the parts on but haven't finished yet. As soon as I get the rotors on I can figure out what back space wheels I want to order!! Than I can really get after it!! Stay tuned!!
Jason

lolife99

07-23-2014 03:37 PM

Re: Jason's Bagged Farm Truck

Looks great!!!

aggie91

07-23-2014 04:05 PM

Re: Jason's Bagged Farm Truck

Nice!

Thunderwagen

07-23-2014 04:47 PM

Re: Jason's Bagged Farm Truck

Awesome work man. I may have to pick your brain some since you arent too far from me. I should be picking up a 64 this weekend.

hopped up

07-23-2014 05:34 PM

Re: Jason's Bagged Farm Truck

Awesome work! Can't believe I hadn't subscribed.

Modges'66

07-23-2014 09:50 PM

Re: Jason's Bagged Farm Truck

O.K. Dino Jr.!!!
I have been watchin forever!
It looks like second time around that you know exactly what to do!!
And for sure, the third will be the charm!!!
Forge ahead, things are lookin sawweeeeet!

64chevtruck

07-24-2014 12:44 AM

Re: Jason's Bagged Farm Truck

GO JASON! Thanks for the pics bud, Your welding is the cats ass.

Have a good week

jdoisher

07-25-2014 12:56 PM

Re: Jason's Bagged Farm Truck

Quote:

Originally Posted by lolife99 (Post 6772930)

Looks great!!!

Quote:

Originally Posted by aggie91 (Post 6772957)

Nice!

Thanks guys!!

Quote:

Originally Posted by Thunderwagen (Post 6773008)

Awesome work man. I may have to pick your brain some since you arent too far from me. I should be picking up a 64 this weekend.

PM me anytime!!!

Quote:

Originally Posted by hopped up (Post 6773063)

Awesome work! Can't believe I hadn't subscribed.

Stay tuned for more!!

Quote:

Originally Posted by Modges'66 (Post 6773448)

His name and mine in the same sentence is a honor!! But doing one makes the other that much easier!!

Quote:

Originally Posted by 64chevtruck (Post 6773721)

GO JASON! Thanks for the pics bud, Your welding is the cats ass.

Thank you very much!!

Have a good week

Will do!!

I have been so busy that I haven't had a chance to put the rotors on and get a wheel measurment!! My buddy John and I are doing drag week this year and its only a month away and the car is a little (a lot) apart!! So I spend almost all of my extra time with him working on the car!! We've only been talking about doing this the last ten years!!!

Thanks so much guys!!
Jason

Thunderwagen

07-25-2014 01:17 PM

Re: Jason's Bagged Farm Truck

What are yall running in drag week?

jdoisher

07-25-2014 04:13 PM

Re: Jason's Bagged Farm Truck

Quote:

Originally Posted by Thunderwagen (Post 6775678)

What are yall running in drag week?

80 LS1 powered Malibu NOS car.
Jason

SCOTI

07-25-2014 05:55 PM

Re: Jason's Bagged Farm Truck

Quote:

Originally Posted by jdoisher (Post 6775853)

80 LS1 powered Malibu NOS car.
Jason

Just an LS1 huh?

jdoisher

07-25-2014 06:10 PM

Re: Jason's Bagged Farm Truck

Quote:

Originally Posted by SCOTI (Post 6775948)

Just an LS1 huh?

lol. 408 with ported LS3 heads, mild cam, little shot. Hoping for 8.90s and make the 1500 mile or so trip!!

SCOTI

07-25-2014 06:20 PM

Re: Jason's Bagged Farm Truck

Quote:

Originally Posted by jdoisher (Post 6775960)

lol. 408 with ported LS3 heads, mild cam, little shot. Hoping for 8.90s and make the 1500 mile or so trip!!

Oh ok..... just an LS 😉

Thunderwagen

07-25-2014 06:36 PM

Re: Jason's Bagged Farm Truck

Nice! I'm building a 90 gmc RCSB with a forged 370 with afr 225s and a T6 borg warner right now. I'm aiming at 9.99 or quicker with it.

SCOTI

07-25-2014 07:27 PM

Re: Jason's Bagged Farm Truck

Quote:

Originally Posted by Thunderwagen (Post 6775988)

Nice! I'm building a 90 gmc RCSB with a forged 370 with afr 225s and a T6 borg warner right now. I'm aiming at 9.99 or quicker with it.

Ohoo... That sounds sweet. Build thread yet?

Thunderwagen

07-27-2014 12:59 PM

Re: Jason's Bagged Farm Truck

Yeah there's a link in my sig.

rusty76

07-27-2014 07:32 PM

Re: Jason's Bagged Farm Truck

I wanna do drag week as well. Neato.

Mad Rods

07-28-2014 12:22 AM

Re: Jason's Bagged Farm Truck

Nice!!!

All times are GMT -4. The time now is 09:23 PM.

Page 5 of 7

Show 40 post(s) from this thread on one page