|
Re: The Snortin' bull
1 Attachment(s)
This was nice to find in the Dana . A loaded posi. No one wheeler peeler here.
|
Re: The Snortin' bull
1 Attachment(s)
This will have to trimmed and bracketed to fit.Transmission mount is a Art Morrison pre made universal piece. For the price you can't beat it. Time is money.
|
Re: The Snortin' bull
1 Attachment(s)
Hinge's cermachromed .Also have latche's done in same coatig for hood. May not use the hinge's in the end they will work now.
|
Re: The Snortin' bull
Quote:
|
Re: The Snortin' bull
1 Attachment(s)
Setting the core support .The frame horn's had been modified so have to make sure fitment is set up good.New lamp harness also in. I can see the light.
|
Re: The Snortin' bull
Quote:
|
Re: The Snortin' bull
1 Attachment(s)
This is the Snort in the bull. A built 400 small block chev. Fully balanced punched out. 272 Isky.Hyper-t pistons.edurashine Edelbrock eps intake. Gm performance,Stewart water pump, ARP h-ware,ported polished heads. Roller rockers etc.behind it will be a 700r4 trans.
|
Re: The Snortin' bull
1 Attachment(s)
Might be minor thing to some but i can't a quarter panel bed side flappin in the breeze. Extended the struts to the frame.
|
Re: The Snortin' bull
1 Attachment(s)
Due to the past phenobulation of the torsion bar front end from the past owner i had to modify the Porterbuilt shock mount's on the frame to allow full open and collapsed shock travel.
|
Re: The Snortin' bull
nice stance love the GMC grills truck is looking great.
|
Re: The Snortin' bull
Been chipping away here and there on GMC .Life get's hectic.More pic's to come and progress.
|
Re: The Snortin' bull
1 Attachment(s)
Got heater assy. mocked up and plumbed thru a bulkhead fitting plate thru firewall.
|
Re: The Snortin' bull
1 Attachment(s)
bulkhead pass thru engine side.
|
Re: The Snortin' bull
1 Attachment(s)
gusset and fish plated.
|
Re: The Snortin' bull
1 Attachment(s)
Installed a simple water control valve for heater. Cable to original dash control's.
|
Re: The Snortin' bull
1 Attachment(s)
The carb B Grant Speed demon, tuned to the engine,Accel hei dist. Recurved for this engine .Tuning from a local long time shop. www.mathewsonsautomotive.com
|
Re: The Snortin' bull
1 Attachment(s)
100 amp one wire alternator. Trailgear auxillary battery holder to mount in rear of truck. A new gm filter assy. Still available since 1960.
|
Re: The Snortin' bull
1 Attachment(s)
Thank's Captain fab. Fitment is great on the booster bracket.
|
Re: The Snortin' bull
Nice to see another 1960 GMC on the forum. There are too many of us.
|
Re: The Snortin' bull
nice progress and great looking project!!
|
Re: The Snortin' bull
Thanks for the compliment.
Quote:
|
Re: The Snortin' bull
Thanks .do not see many snout trucks out there.
Quote:
|
Re: The Snortin' bull
2 Attachment(s)
Master cylinder and booster done and mated to original pedal swing inside.
|
Re: The Snortin' bull
1 Attachment(s)
Some cross bracing and bed floor support for bed and frame. Nothing fancy.
|
Re: The Snortin' bull
1 Attachment(s)
Small block chev 400 mated to 700r4. Ready to move into there new home.
|
| All times are GMT -4. The time now is 03:34 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com