Originally Posted by 72K5CSTDarkOlive (Post 8590338)

It was almost 2 years ago when I originally finished my Blazer and since then I've logged about 4K miles. I decided to make some changes (which btw is an understatement), and I figured I would start a new thread. Some of you are familiar with my first build and for those who are not, it's called "Attempting my first build"

I've spent the last 3 months planning this out and here's what I'm doing.

1. LS Swap 6.0 (LQ9)

2. Atlas Suspension & Fox Shocks: I'm going to be using their custom 52" progressive front springs and rears with the DIY4x B52 First Gen Hanger Kit https://diy4x.com/product.php?produc...cat=250&page=1

The front springs are 10" longer than stock and this should help soften the ride.

3. Front Swaybar & cross member from a square body.

4. Dakota Digital Gauges

5. Custom Center Console

6. Custom Sound system

7. Updated fuse panel, a relay panel, and switches to control the relays

8. Vintage Air setup

9. Smooth Firewall using Vannatta fabrications 5 piece firewall kit