|
Dad's old '80 SWB...
1 Attachment(s)
I thought I'd start a build thread so I could share my progress and stay motivated!
This 1980 SWB was purchased used by my Dad when I was in high school in about '84 or '85. It was freshly repainted the original dark red (maroon??) although it appears to have originally had a white center stripe. This truck was always really cool to me, and I have fond memories of taking my first real girlfriend on a few dates in it... My dad parked it in 2001 and was going to sell it, so I bought from him. I striped the interior out (was very tired) and pulled all the chrome to send the truck to the paint shop. Then LIFE got in the way and it sat in storage until a few weeks ago (12/2010). Time to get it back on the road! Plans for it include: Chassis prep and paint Dropping in a new engine... (pics and details to follow) Repairing factory heat and AC New paint in the original color... New interior in black... spray in bed liner 2 inch rear drop to level the truck Restore factory Ralleys with T/A Radials New bumpers and trim (not sure about side trim or smooth!) Here is a BEFORE pic... |
Re: Dad's old '80 SWB...
Welcome! Glad to see more local guys, and looking forward to seeing some updates. If you need anything, feel free to holler!
|
Re: Dad's old '80 SWB...
5 Attachment(s)
The first weekend I built a dolley to hold the front clip and pulled the sheet metal.
|
Re: Dad's old '80 SWB...
3 Attachment(s)
Last weekend... OUT CAME THE OLD POWERPLANT!
|
Re: Dad's old '80 SWB...
Quote:
I'm sure I will need lots of help and suggestions. I'm not new to spinning wrenches on old cars... but have never actually done a full restoration before!!! |
Re: Dad's old '80 SWB...
2 Attachment(s)
Here is the old engine and the one that will replace it...
The old one is a 305 2bbl :( The new one is a '74 350, flat top pistons, vortec heads, performer intake, holley 600, with HEI Equiped with a new GM serpentine belt accessory setup from SUMMIT! I plan on using this AC compressor with the factory air... (will burn that bridge when I get to it!) Notice the TH350 trans... worked great, but would leak if you let the truck set... (gotta decide what to do with that...) |
Re: Dad's old '80 SWB...
nice looking Build
|
Re: Dad's old '80 SWB...
Use an A/C hose for a '91 K5 Blazer or Suburban without dual A/C, and you will be fine. Hose is about $60 from NAPA.
|
Re: Dad's old '80 SWB...
Quote:
|
Re: Dad's old '80 SWB...
looking good if i were u i keep the side chrome
|
Re: Dad's old '80 SWB...
nice build man, seeing this is down the road from me ima subscribe, any help needed let me know.
|
Re: Dad's old '80 SWB...
I am diggin the truck, and the Lone Star Flag. I will suscribe to this thread.
|
Re: Dad's old '80 SWB...
Quote:
Quote:
Quote:
|
Re: Dad's old '80 SWB...
i seen your band has played out at longhorn and you also have a bike.. you could possibly know my dad? or at least seen him, hes always out there with his.
|
Re: Dad's old '80 SWB...
Quote:
Very possible! |
Re: Dad's old '80 SWB...
1 Attachment(s)
small world, heres his bike not a good pic, but the only one i have
|
Re: Dad's old '80 SWB...
Welcome from Haslet! Good looking truck you got there. I like the side trim on those trucks when they're two tone. I can't remember seeing many solids with the trim. Should be sweet either way.
|
Re: Dad's old '80 SWB...
Quote:
Quote:
No updates... what little shop time I had this weekend was spent trying to fix the heated seats in my 04 Tahoe... If you wanna see a toasted butt toaster.... click here http://67-72chevytrucks.com/vboard/s...d.php?t=437408 |
Re: Dad's old '80 SWB...
I am having withdrawal symptoms from not working on my truck!
WAY to early in this project to start getting bogged down... First it was the holidays, then working on the daily driver, then getting the old Chevelle ready to sell, then 3 of the 4 light fixtures in my shop died... NOW the band is audtioning new singers.... I have, however, started pulling the power steering box to reseal it. I really need to push the truck outside and power wash and degrease everything to get ready to paint the frame and front end... but seeing that its 24 degrees today, I dont see that happening! |
Re: Dad's old '80 SWB...
Cool build ya got goin on, I say keep the trim too, mine had it as a solid color truck but I removed it and filled all the holes , I would like to put it back on ,
|
Re: Dad's old '80 SWB...
Is the RE-POP side trim on the market any good?
|
Re: Dad's old '80 SWB...
10 years ago I built this truck from the frame up. Every single piece of molding was aftermarket from LMC. Not perfect but good enough to install without any headaches and a nice look once installed. I liked it enough that I'm about to order a full set for my current buildup.
http://i276.photobucket.com/albums/k...tachment-4.jpg |
Re: Dad's old '80 SWB...
Wow that looks good and straight on a very clean truck to, would you have to drill all the mounting holes or could some kinda 2 sided tape ?
|
Re: Dad's old '80 SWB...
There were lots of holes to drill. We had to do all the body work and assemble the truck. Mark and drill all molding holes, then disassemble the entire truck and paint it before fully reassembling it.
Posted via Mobile Device |
Re: Dad's old '80 SWB...
4 Attachment(s)
HAD SHOP TIME TODAY!!!! YEA!!!!
Pulled the power steering box to reseal... pulled the bed... and spent 2 hours pressure washing the frame and suspension (and its still not clean!) |
| All times are GMT -4. The time now is 07:55 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com