Plasti Dip for wire harness retainers etc.
 

Anyone try this stuff or similar? Supposedly it does well under extreme temps. Seems ideal for these, as a start.https://www.youtube.com/watch?v=6fuIjaXSCxk

Re: Plasti Dip for wire harness retainers etc.
 

I would try it, it seems like a good idea. Is that a wire bundle clip? Where did you find that?

Re: Plasti Dip for wire harness retainers etc.
 

Thats a good idea. Ive used plasti dip on tool handles quite a bit, never considered using it like this.

Re: Plasti Dip for wire harness retainers etc.
 

It's one of the clips used for the intermediate and rear wire harnesses. I think 13 total. Just speaking for my truck, the clips along the frame rail were tan rubber/plastic coated, and the ones along the rear bed support were black coated. I figure all black is good enough;)

https://www.classicparts.com/1947-72...ctinfo/52-905/

Picture of original too

Re: Plasti Dip for wire harness retainers etc.
 

I have been using it for years. It works, but you may have to double dip to get a similar thickness that came from the factory.

I have a spray bomb of it also. It takes several coats to replicate the factory finish.

Re: Plasti Dip for wire harness retainers etc.
 

why bother?

Re: Plasti Dip for wire harness retainers etc.
 

So the metal edges of the clip don't chew into the insulation of your wiring in extreme conditions.

Re: Plasti Dip for wire harness retainers etc.
 

Plus I think a lot of fellas like to add that extra detailing touch. Sometimes I see our trucks all done up all nice, but some small brackets, or nuts etc were never touched up. They really stand out when the rest of the truck looks so good.

Re: Plasti Dip for wire harness retainers etc.
 

Works for the spark plug wire Retainers as well.

Re: Plasti Dip for wire harness retainers etc.
 

I used it for the same purpose

Re: Plasti Dip for wire harness retainers etc.
 

Yep. I'm half tempted to dip the entire thing, perhaps more kind to the frame:lol: That said, what you did looks exactly original. Looking forward to seeing how the battery cable retainer comes out too, should be nuts.

Re: Plasti Dip for wire harness retainers etc.
 

That is a pretty cool. I can think of a few things I'd like to try too..

Re: Plasti Dip for wire harness retainers etc.
 

We need a new thread on uses for baling wire.

Zip ties are the new baling wire, but you can't hang parts from them. :lol::lol:

Re: Plasti Dip for wire harness retainers etc.
 

Velcro;) I use it often for this & that around the house, but can't hang auto parts from that either.

If I remember right the old timers all said WD-40, duct tape and bailing wire. They neglected to mention vinegar, IMO:smoke:

Re: Plasti Dip for wire harness retainers etc.
 

I miss this thread some-how.:ito:

I really like Plastic-Dip.
I have used it on many projects.
Double dipping as already mentioned makes for great results.

And I also like the Liquid tape product .
I use it on my wiring projects.
You could probably use this to touch-up the plastic dip?

Three coats is best for this stuff.

Link:https://plastidip.com/our-products/liquid-tape/











.

Re: Plasti Dip for wire harness retainers etc.
 

I have been using plastic dip for other projects as well. Just thinking outside of the box.
Vic