The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1969 - 1972 Blazers and Jimmys Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=36)
-   -   69-72 Blazer push-on door seals (https://67-72chevytrucks.com/vboard/showthread.php?t=796597)

Precision Parts 11-13-2019 08:09 PM

69-72 Blazer push-on door seals
 
These are now available and shipping to distributors. They include a metal core in the molded end so the 3 bolts won't rip the rubber molded end. I will have one on display at Dino's Git Down on November 15th if your in the area.

Part number: DWP 1111 69.

-Derek

A1971Blazer 11-14-2019 08:16 AM

Re: 69-72 Blazer push-on door seals
 
just received mine.....haven't installed them yet but they look very good

7D2N 11-14-2019 10:17 PM

Re: 69-72 Blazer push-on door seals
 
5 Attachment(s)
I got a set and pleased with how they fit. I couldn't put them all the way on because I need to trim the repo rocker along the floor to fit the seal.

7D2N 11-14-2019 10:26 PM

Re: 69-72 Blazer push-on door seals
 
2 Attachment(s)
couple more..

PDXk5 11-14-2019 11:44 PM

Re: 69-72 Blazer push-on door seals
 
2 Attachment(s)
That looks great. I received mine today. One of them has two small tears in it. I opened both and may have put them in the wrong bags. It looks like the driver side (but it’s in the bag marked DWR).
I’ll have to reach out to GMCPauls to see what can be done for a replacement.

7D2N 11-15-2019 10:36 AM

Re: 69-72 Blazer push-on door seals
 
My seals were in bags marked DWR and DWL then the part number. I assume for right and left. the seals fit tight and don't slide around at all.

SeventyOne 11-15-2019 01:47 PM

Re: 69-72 Blazer push-on door seals
 
Quote:

Originally Posted by 7D2N (Post 8627435)
My seals were in bags marked DWR and DWL then the part number. I assume for right and left. the seals fit tight and don't slide around at all.

I should be putting mine on tomorrow!

DaHos 11-20-2019 03:43 PM

Re: 69-72 Blazer push-on door seals
 
Getting ready to install mine today and I encountered the same thing with the right being in the left bag and the left being in the right bag, other than that they look good we'll see how they fit here in a bit.

PDXk5 11-21-2019 02:14 AM

Re: 69-72 Blazer push-on door seals
 
Quote:

Originally Posted by DaHos (Post 8630301)
Getting ready to install mine today and I encountered the same thing with the right being in the left bag and the left being in the right bag, other than that they look good we'll see how they fit here in a bit.

GMCPauls has put in a replacement order to Precision for me. It shipped Monday so I should have it shortly.

I’m interested to hear how everyone’s installation goes. Please share. It will be good to compare notes on how things go.

Thanks!

SeventyOne 11-21-2019 02:36 PM

Re: 69-72 Blazer push-on door seals
 
Here's my installation notes in my build thread.

http://67-72chevytrucks.com/vboard/s...&postcount=209

As mentioned the seals install super easy. Getting the top realigned was not.

I'd also like to note that the seal part the touches the door is VERY soft and supple but as seen it can tear easily. As i was fitting up my sill plates I cut a 1" gash in my passenger seal. So tread VERY carefully around them.


All times are GMT -4. The time now is 08:38 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com