Quick Saturday Project, LED Gear Indicator Light
 

I've been working my way through some final interior details, one of which was a fairly crusty gear indicator. After disassembling it for paint, I noticed that the fiber optic cable was cut right after it exited the steering column, and the bulb holder was MIA. So, I decided to upgrade to some newfangled LED magic. $6 later...magic!

I used these 3mm warm white LEDs which already have a load resistor on them.
https://www.amazon.com/dp/B07T8H5527..._1NJxFb125Q541

For power I tapped into the empty inst/gauge illumination spade on the fuse block (right beneath the fuse) with a 1A in-line fuse just in case the wires I pulled ever short. If you decide to do this, make sure you use small gauge wires to power the LED. Pulling 18ga through the steering column was a PITA.

The end result is really nice, dims perfectly along with my classic instruments cluster, and should last much longer than the OG bulb/fiber solution.

Re: Quick Saturday Project, LED Gear Indicator Light
 

Nice work!

Re: Quick Saturday Project, LED Gear Indicator Light
 

Agreed ^, nice work! Your post will help all those future "LED gear indicator light" searches on this board, job well done.