No Limit Spy Photos
2 Attachment(s)
Spy Photos
|
Re: No Limit Spy Photos
New "NoLimit Member" jig?
|
Re: No Limit Spy Photos
Very interesting.....
|
Re: No Limit Spy Photos
Kinda Chris Alston looking,... isn't it.
|
Re: No Limit Spy Photos
1 Attachment(s)
New Parts
|
Re: No Limit Spy Photos
You going to offer it coilover or air bags?
|
Re: No Limit Spy Photos
Quote:
|
Re: No Limit Spy Photos
Quote:
|
Re: No Limit Spy Photos
Hopefully in two weeks. - need to make sure there ready to go. Plus, No Limit dealers get first crack at a pre-release.
|
Re: No Limit Spy Photos
Any spy photos for the rear ?
|
Re: No Limit Spy Photos
What gen is this for? 73-87?
|
Re: No Limit Spy Photos
We are working on an updated version of our Wide-Ride 3 to fit as a bolt-in for 63-72, and 73-87
|
Re: No Limit Spy Photos
probably a stupid question, but would this work on the old square body 1 tons? or is the frame a different setup on them compared to the 1/2's?
|
Re: No Limit Spy Photos
Quote:
|
Re: No Limit Spy Photos
Is the spy still on special assignment ?
|
Re: No Limit Spy Photos
any updates?
|
Re: No Limit Spy Photos
The spy is wet sanding today. We are finalizing motor mount towers at this point. Complex forming is holding us up, have to make new forming dies.
|
Re: No Limit Spy Photos
update ?
|
Re: No Limit Spy Photos
Motor mount towers are done, and after a week, we're finally rested up from the Del Mar thrash. We are shooting an install this weekend, well saturday, I'll post up some on monday. Happy Easter.
|
Re: No Limit Spy Photos
tomorrow is Monday.
|
Re: No Limit Spy Photos
Will this work with the current rack & pinion set up you offer? Is there going to be control arms offered also?
|
Re: No Limit Spy Photos
This crossmember is on a bit of a different track than most. We are moving away from the C-10 components. This will be a new version of our Wide-Ride IFS, a complete IFS package including the crosmember, A-arms, coil-overs, shockwaves, or bags/shocks, spindles, brakes, power rack, and sway bar. The spindle is based on a late model Impala, with 12" drilled/slotted rotors, your choice of any 5 lug pattern, sorry, no 5 lugs yet. The track width is 63" hub to hub. Groung clearance on the crossmember is raised 2" over stock, and ride hieght, without a dropped spindle is a 4" to 5" drop from stock, and 2" drop spindles are avail. Motor mounts are included, and will fit SBC, BBC, and LS.
|
Re: No Limit Spy Photos
Looks good Rob!
|
Re: No Limit Spy Photos
2 Attachment(s)
Update
|
Re: No Limit Spy Photos
Is the Impala spindle taller them the c10 spindle ?
|
All times are GMT -4. The time now is 12:08 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com