|
1972 C10 LWB Georgia Project
5 Attachment(s)
Thought I would start a thread about building my truck from just a project. Finding parts and the products I used and things I learned. If it helps someone else great.
|
Re: 1972 C10 LWB Georgia Project
2 Attachment(s)
Made a couple dollies to move box around on,
|
Re: 1972 C10 LWB Georgia Project
3 Attachment(s)
Found a donor turbo 350 from a 1969 c10, had rebuild, new convertor, shot blasted and painted with Aluminum blast from Eastwood.
|
Re: 1972 C10 LWB Georgia Project
3 Attachment(s)
Started to weld in door bottoms only to abandon and go to full skins, much easier for the money.
|
Re: 1972 C10 LWB Georgia Project
3 Attachment(s)
Found a donor 1972 4 bolt 350 complete for $200
|
Re: 1972 C10 LWB Georgia Project
2 Attachment(s)
Sent heads out to have cleaned and shot blasted, cost 50 bucks
|
Re: 1972 C10 LWB Georgia Project
4 Attachment(s)
Got block back from machine shop, line honed, bored .040 with deck plate, new brass soft plugs, ground crank .010 .010 recon rods, and new Speed Pro Hypereutectic pistons, should work out to 9.25 to 1
|
Re: 1972 C10 LWB Georgia Project
4 Attachment(s)
Comp cams 270h and lifters, I found if I buy online through Advance they will give you up to 25% off and free shipping, painted block with Duplicolor ceramic Chevy orange-red from O'Riellys
|
Re: 1972 C10 LWB Georgia Project
4 Attachment(s)
Cab Coming off, again built a simple cart to roll it around on. Maybe 80 bucks in steel from Alro surplus store. 4 guys can lift it no problem. Saves bending things with hoist.
|
Re: 1972 C10 LWB Georgia Project
I will continue to add pictures each day until Im caught up to most recent progress. Any questions I can answer feel free, this site has helped a great deal.
|
Re: 1972 C10 LWB Georgia Project
Nice work .....I’ll be checking in
|
Re: 1972 C10 LWB Georgia Project
Quote:
|
Re: 1972 C10 LWB Georgia Project
Wheels from Summit, 15x7 front 15x8 on rear Mickey Thompson Sportsman ST 275/60 15 rear225/70 15 fronts
|
Re: 1972 C10 LWB Georgia Project
1 Attachment(s)
Picture of them
|
Re: 1972 C10 LWB Georgia Project
4 Attachment(s)
Disassembling frame, Frame was very clean and had been sprayed with some type of rust proofer. I decided to clean with large wire brush instead of media stripping.
|
Re: 1972 C10 LWB Georgia Project
3 Attachment(s)
POR 15 was my choice for coating, Chassis black and used a brush, I kind of dabbed it instead of brushing to keep stroke marks off the frame. I am building what I hope to be a Nice Driver quality truck
|
Re: 1972 C10 LWB Georgia Project
4 Attachment(s)
Up front I am using 2.5 drop spindles and 2 inch drop spring from Western Chassis, I would not recommend them, parts are good quality service was not. I would suggest CPP in the future.
|
Re: 1972 C10 LWB Georgia Project
New ball joints, tie rods, front sway bar, and shocks, I had called about maybe getting wrong shocks in kit. Western never replied or called back.
|
Re: 1972 C10 LWB Georgia Project
4 Attachment(s)
In the rear I choose to go 2 inch lowering block, 4 inch drop spring and adjustable pan hard bar. 3.73 gears will stay however I will add a posi unit at later date, trying to keep project moving forward.
|
Re: 1972 C10 LWB Georgia Project
3 Attachment(s)
Drums turned, cleaned and painted with Eastwood cast heat paint, new shoes inside, wheels and tires bolted up all new fasteners are being used. some with kit from TSC grade 8 gold
|
Re: 1972 C10 LWB Georgia Project
I choose not to notch frame, I may regret it later but I can always do that.
|
Re: 1972 C10 LWB Georgia Project
Some of the fasteners I wanted to reused, wire brushed and painted with Eastwood zinc oxide paint.
|
Re: 1972 C10 LWB Georgia Project
1 Attachment(s)
picture of them bolts, doing this mostly on breaks and lunch at work, bare with me.
|
Re: 1972 C10 LWB Georgia Project
3 Attachment(s)
Engine going back together, I fealt confident in my engine machining I still used plasti guage. Pain but still thought it was best.
|
Re: 1972 C10 LWB Georgia Project
Cylinder heads completed by a buddy that does only heads, surfaced and reassembled. We changed from 1.94 int. and 1.5 exh. to 2.02 and 1.6 stainless valves, pocket and cleaned up intake runners, swirl cut guides, hardened seats, Z28 springs, The heads were 487X castings and 76cc Attachment 1833996
Attachment 1833997 |
| All times are GMT -4. The time now is 09:08 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com