rearends, frontends and more!!!
 

Here are some 14 bolt Dana rearends I have plus a couple 10 bolts

10 Dana 44 frontends, our style and newer. About 5 or so 3/4 frontends around, still sorting there are more to come!

three 3/4 2wd rearends non posi

keep me in mind while going through those 3/4t rears. It may be a bit before I can come get it but I can get it paid for.

Thanks

Chad

Chad, your first in line on the ones you asked me about, I'm trying to figure out ratio on them, two of the them have 32 teeth, the other has 41, they are open rears. Thanks Randy

How much are you asking on those 4x4 front ends?

would you be willing to sell the front sway bars off any of those dana 44s?

I'll pm you.

any 12 bolt rears with 4:10's (posi would be a plus) thanks

Randy, seems my email server is down again. How is tomorrow for you?

MJN, Sorry no 12 bolt posi's
Kevin tomorrow afternoon about 3 would work, I got to deliver a truck to KC in the morning if its not snowing to much.
Thanks Randy

Just spoke with Rob. Saturday is no good. Sunday is better for him. How is that?

Do you have prices for anything?

Don't know if I can afford anything right now but I'm looking for a 14 bolt or dana 60 f/f rear and matching front (HD-44 fine) for the panel project. Going to snoop around to see what I dig up once I get in GA, but I'm looking everywhere at the moment.

Kevin, Sunday is fine, let me know what time, I found some blue door panels too!
Baradium, I'll get some prices on these, I just posted pics to let guys see what I'm getting in. I'm sure I'll have what your looking for.
Thanks Randy

Ever make any trips out to NC? If so let me know I may be interested in a 14ff out of a 3/4 ton that will fit a 73-87 truck. Also a matching front end if you have one with the same ratio, HD-44, I don't have the money to spend on D60 front ends, those suckers are costy! And getting rare to find too!

Actually I may have spotted one in a yard last time I was out there, gonna run back out there sometime and check it out to make sure its really a D60 and see what they want for it.

Sorry never out that far, pretty much just surrounding state here. I hope you found a Dana 60, those are nice ones. Thanks Randy

Ya, I swear this one didn't look like a 10 bolt when I looked under it, and I don't think it could be anything else. So I should probably go check it out before someone else finds it. Chances are the yard doesn't even know what its worth anyway. Its still under the truck with wheels on it. Rearend has "no oil" written on it though so maybe its not good anyway. But it could probably be rebuilt.

I will call him this afternoon and let you know here or by PM. I think PM's will still work. My email is still down. They had a wrestling tourny today.

what are gears are in those chevy 14 bolts u got ? You got any Rockwell duece stuff ?

I know there is 4.56 for sure, I haven't checked the others, not sure on the rockwells, I have a few of them out of 68 4x4's, no shipping on any of this stuff though. Thanks Randy

Hey teeitup,
You got a front end off a 3/4 or 1 ton 2WD, like A-arms, springs, spindle, hubs, brakes? basically the whole front end...

I've had 4-5 of them in the past year an nobody ever wanted anything, they went to scrapyard, sorry. Thanks Randy

you going to post prices for us maybe?

Thanks,
Ryan

I will when I get time to see what I have, are you going to drive up here from Tennesee to get them?

hay teeitup,
I was wandering if you have the panard bar for a 3/4 ton, with coils, and gm rear axle. if you do, shoot me a price for it.
thanks