Cranks on run and crank/gauge question
At it again, I pulled my old harness and putting in a new bp automotive harness, I was hooking up the starter and solenoid wires, now it cranks in the run and crank position. Has anyone else encountered this problem? I did have a issue with the neutral safety switch before. I havnt fully wired up the gauges and inside of my cab. This is kicking my butt.
Second question I just bought a autometer 7004 lcd gauge cluster, I was running autometer electric gauges before, are those sending units still the same? |
Re: Cranks on run and crank/gauge question
might check the wire connections for the switch sound your your switch on and crank are touching or connected wrong..
|
Re: Cranks on run and crank/gauge question
You might also check your wires on the plug to make sure they’re in the right place my headlight switch from them came miss wired
|
All times are GMT -4. The time now is 09:50 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com