The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 1 of 2

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)

- - IA parting out 1972 blazer frame. (https://67-72chevytrucks.com/vboard/showthread.php?t=659512)

offroden

02-08-2015 08:12 PM

parting out 1972 blazer frame.

2 Attachment(s)

Cutting up blazer 4wd frame.
Have drive shafts also.

briank

02-08-2015 08:19 PM

Re: parting out 1972 blazer frame.

Selling the rear bumper brackets or gravel shields?

1rippen6

02-08-2015 08:29 PM

Re: parting out 1972 blazer frame.

How much for the rear frame section both sides from the bumper to the rear crossmember shipped to 17225 if in good shape

offroden

02-08-2015 08:34 PM

Re: parting out 1972 blazer frame.

There aren't any of those.

offroden

02-08-2015 08:35 PM

Re: parting out 1972 blazer frame.

There is rust on the rear frame location.

CrewCab59

02-08-2015 09:18 PM

Re: parting out 1972 blazer frame.

How about the 2 exhaust hangers?

29od1

02-09-2015 08:33 AM

Re: parting out 1972 blazer frame.

How much are you asking for the 3 sets of rear body mount brackets?
Thanks,
David

offroden

02-09-2015 09:38 PM

Re: parting out 1972 blazer frame.

1 Attachment(s)

I only have the one hanger.

offroden

02-09-2015 10:23 PM

Re: parting out 1972 blazer frame.

2 Attachment(s)

Quote:

Originally Posted by 29od1 (Post 7040470)

How much are you asking for the 3 sets of rear body mount brackets?
Thanks,
David

Are these the ones?

29od1

02-10-2015 04:24 AM

Re: parting out 1972 blazer frame.

Quote:

Originally Posted by offroden (Post 7041626)

Are these the ones?

Yep those are the ones.

jpmanyhearts

02-10-2015 09:09 PM

Re: parting out 1972 blazer frame.

I need the engine cross member to 59501 like last week lol please let me know thank you

CrewCab59

02-10-2015 09:31 PM

Re: parting out 1972 blazer frame.

Quote:

Originally Posted by offroden (Post 7041512)

I only have the one hanger.

How much , shipped 37721.

Thanks

offroden

02-10-2015 09:52 PM

Re: parting out 1972 blazer frame.

Quote:

Originally Posted by CrewCab59 (Post 7043029)

How much , shipped 37721.

Thanks

35 for the exhaust bracket

offroden

02-10-2015 09:54 PM

Re: parting out 1972 blazer frame.

Quote:

Originally Posted by jpmanyhearts (Post 7042991)

I need the engine cross member to 59501 like last week lol please let me know thank you

You need all three pieces.
125 shipped for all three.

29od1

02-10-2015 11:16 PM

Re: parting out 1972 blazer frame.

Quote:

Originally Posted by offroden (Post 7041626)

Are these the ones?

Can you give me a quote on these frame to body brackets?

jpmanyhearts

02-11-2015 01:44 AM

Re: parting out 1972 blazer frame.

Quote:

Originally Posted by offroden (Post 7043077)

You need all three pieces.
125 shipped for all three.

is that the cross member and the 2 motor mounts ??

CrewCab59

02-11-2015 09:26 AM

Re: parting out 1972 blazer frame.

Quote:

Originally Posted by offroden (Post 7043070)

35 for the exhaust bracket

I will pass.

Thanks

A1971Blazer

02-11-2015 03:22 PM

Re: parting out 1972 blazer frame.

I need the very front cross member that is riveted in......if it's straight...?

offroden

02-12-2015 10:51 PM

Re: parting out 1972 blazer frame.

Quote:

Originally Posted by A1971Blazer (Post 7044011)

I need the very front cross member that is riveted in......if it's straight...?

I'll take a look

A1971Blazer

02-27-2015 12:06 PM

Re: parting out 1972 blazer frame.

Quote:

Originally Posted by offroden (Post 7046130)

I'll take a look

Any word..........????????????????

1972 Jimmy

02-27-2015 02:55 PM

Re: parting out 1972 blazer frame.

1 Attachment(s)

Do you still have both exhaust hangers? The large one is under the drivers side seat and the smaller one is on the crossmember just in front of the rear axle.
Thanks,
Eric
Attachment 1370010

offroden

02-28-2015 12:27 PM

Re: parting out 1972 blazer frame.

I know I have the large one. I'll have to check on the small one.

offroden

02-28-2015 02:35 PM

Re: parting out 1972 blazer frame.

1 Attachment(s)

Quote:

Originally Posted by A1971Blazer (Post 7068115)

Any word..........????????????????

Here is what it looks like. Is it supposed to be spotwelded to the frame?

A1971Blazer

03-02-2015 07:56 AM

Re: parting out 1972 blazer frame.

Quote:

Originally Posted by offroden (Post 7069728)

Here is what it looks like. Is it supposed to be spotwelded to the frame?

No, it's riveted thru the frame rails. The rivets would have to be ground off on one side and punched out. If you don't want to do that no problem, I understand.

1972 Jimmy

03-03-2015 02:14 PM

Re: parting out 1972 blazer frame.

Quote:

Originally Posted by offroden (Post 7069604)

I know I have the large one. I'll have to check on the small one.

Any luck on the two exhaust brackets?

All times are GMT -4. The time now is 05:21 AM.

Page 1 of 2

Show 40 post(s) from this thread on one page