Spare Carrier with Cover and Hardware
 

K5 spare tire carrier with factory cover and mounting hardware. Has heavy pitting and pinholes on bottom flanges, will need metal work. Cover has several small holes. Attach washer is from an 80's Blazer, is not correct for a K5. The attach bolt is a correct reproduction produced by board member 71K5Randy. $250 shipped in lower 48.

Re: Spare Carrier with Cover and Hardware
 

Nice pieces. Can you post a photo of the rear of the spare tire cover?

Re: Spare Carrier with Cover and Hardware
 

Here you go. Again, flanges are very rough and the cover has 3 or 4 small holes. Please advise if this is not the correct cover for a first gen Blazer. Thanks!

Re: Spare Carrier with Cover and Hardware
 

Thanks for posting. I believe that’s an OEM spare cover based on other examples posted here over the years. I saw one that had a part number stamped on the inner lining but may have been a later square body example. That I have here doesn’t have a discernible part number and looks just like yours. That’s certainly a rare item.

Re: Spare Carrier with Cover and Hardware
 

Sold