The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1988-1998 GMT400 Chevy & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=11)
-   -   Salvage yard parts (https://67-72chevytrucks.com/vboard/showthread.php?t=188048)

cantburn 02-02-2006 12:33 PM

Salvage yard parts
 
5 Attachment(s)
I have set up agreements with several salvage yards I frequent. These yards have several older chevy and GMC pickups as well as a couple newer suburbans etc. There are some trim pieces left in these, dash pieces, seat belts etc., as well as what you would normally find in a wreck. They are on the way home from the fire dept. I will look through these if there is a need from someone who does not have access to a yard. I will do this for a nominal fee and will depend on the part but it will be done mainly as a service for some of you out there that don't have the resources. Chip

cantburn 02-02-2006 12:35 PM

Re: Salvage yard parts
 
I am going there Saturday and write down a list of vehicles on site and what these vehicle have as far as parts that may be utilized. I will copy a list of needs and set up delivery scenarios to zip codes. Chip

cantburn 02-02-2006 12:36 PM

Re: Salvage yard parts
 
I will also have a digital camera with me and take pictues of a needed part to see if that is the right one and condition.....

cantburn 02-02-2006 01:10 PM

Re: Salvage yard parts
 
Last but not least, if you don't wish to post the needs on this page...PM me or my E-Mail is ParrotHeadParts@aol.com

53burb 02-03-2006 03:01 AM

Re: Salvage yard parts
 
I would be interested in a decent, blue 60/40 bench seat from an early nineties GM truck.

cantburn 02-03-2006 08:38 AM

Re: Salvage yard parts
 
I'll start the search Burb....If I find one I'll get the info to you.

Kurt L 02-04-2006 04:18 PM

Re: Salvage yard parts
 
i'm looking for a good floor mat that came original in 91 with 5spd shifter.

alpha_male0203 02-04-2006 05:57 PM

Re: Salvage yard parts
 
I am looking for a door that is from a 95 96 97 that is with power options.
I can't find any around here. Have couple more places to try. Looking for prices that you can get them for. Also i am looking for no dents ,paint dont matter, minor scratches, Dont need mirror will take though, also will window, and all the inerds (sorry for the spelling), I think you get it thanks

cantburn 02-04-2006 06:30 PM

Re: Salvage yard parts
 
Ok, the list is made and waiting on the weather to clear or it will be a mud bath at the yard....

partsman9606 02-04-2006 07:36 PM

Re: Salvage yard parts
 
hey cantburn how about a overhead console for like a tahoe or burban like the one you have???

cantburn 02-06-2006 06:27 AM

Re: Salvage yard parts
 
PM sent

partsman9606 02-07-2006 10:11 PM

Re: Salvage yard parts
 
how much for the grille???

ronsk10 02-08-2006 03:59 AM

Re: Salvage yard parts
 
I need a 1 piece rear slider window for a 94. Thanks Ron

cantburn 02-08-2006 09:04 AM

Re: Salvage yard parts
 
look for it today

454_72_4X4 02-08-2006 02:00 PM

Re: Salvage yard parts
 
Hey Chip,
If ya happen to run across any of those trucks that still has the door switch for the dome light, I could use a couple of 'em. No need for a special trip to the yard but if ya think of it when you're there...
Thanks;
454

alpha_male0203 02-11-2006 06:07 PM

Re: Salvage yard parts
 
Any luck with the door. thanks man

phantom dually 02-11-2006 08:11 PM

Re: Salvage yard parts
 
Quote:

Originally Posted by 454_72_4X4
Hey Chip,
If ya happen to run across any of those trucks that still has the door switch for the dome light, I could use a couple of 'em. No need for a special trip to the yard but if ya think of it when you're there...
Thanks;
454

these can be found at the dealer for around $4 each.

1969owner 02-11-2006 08:41 PM

Re: Salvage yard parts
 
i need a 69 tailgate...fleetside

veedublu 02-11-2006 11:18 PM

Re: Salvage yard parts
 
I'll pay good money for a solid bench from an '88 to '94. Not interested in 60/40's, bucket seats, or work truck seats... looking for a solid bench, with or without headrests, with or without the fold-down armrest, and must be in good condition (not torn, not greasy, etc). If you run across something like this and are willing to ship, I'll make it worth your while. This goes for anyone who might have one of these :)

Thanks

John

cantburn 02-12-2006 12:30 AM

Re: Salvage yard parts
 
PM's sent to Veedublu and 1969owner

bigunde 02-12-2006 09:56 AM

Re: Salvage yard parts
 
Still waiting on specific info on that 4l60e

cantburn 02-13-2006 01:42 AM

Re: Salvage yard parts
 
Bigunde..what condition do you want the trans in....I have found them with a price range from $350.00 to $650.00 plus shipping. I am unsure of the condition of the 350.00 just the difference in salvage yards maybe.It is still a work in progress.

cantburn 02-14-2006 06:16 PM

Re: Salvage yard parts
 
4 Attachment(s)
Alpha here is a few pics of the door.....also found a decent 60/40 bench in blue...chip

cantburn 02-14-2006 06:17 PM

Re: Salvage yard parts
 
2 Attachment(s)
Here are pics of the bench.

454_72_4X4 02-14-2006 07:00 PM

Re: Salvage yard parts
 
I could use that door handle trim piece you're holding up in the last "door" pic! Actully I need one for both sides and the little tweeter speaker cover for the passenger side.


All times are GMT -4. The time now is 02:46 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com