Stock exhaust system
 

Looking for a complete STOCK single exhaust system to put on a my 66 Burb with 327. Would like aluminized pipes and complete with all hangers etc.
Any ideas who sells a top quality system? FLOWMASTER system that was put on my burb, sounds great but on long trips I would like to be able to hear my radio playing. Jim

Re: Stock exhaust system
 

where do your tailpipes come out?
ron

Re: Stock exhaust system
 

I have one that I just took off of my suburban. Only problem is that it's 51 years old! But seriously, if you were closer you could take it to a muffler so and have it copied.

Re: Stock exhaust system
 

this the stock type muffler for a 65GMC panel
http://i908.photobucket.com/albums/a...ps0bbe3c79.jpg
http://i908.photobucket.com/albums/a...ps4e5a0878.jpg
ron

Re: Stock exhaust system
 

I would have your local exhaust shop make it. its basically a Y pipe like below, over to the driver's side. then straight back, up over the rear axle and back down, then a 90 degree bend out behind the rear tire. Simple simple.

http://jase-ace.com/public/photo/196...r%20-%2002.jpg

Re: Stock exhaust system
 

Walker muffler has all the exhaust system pipes for the truck. They have schematic showing complete layout with pics of parts and part numbers.
Hth

Re: Stock exhaust system
 

Check out heartthrobexhaust.com. They make all the exhaust systems for J.C. Whitney. I ordered a dual exhaust system with side exit behind rear wheels, for a 65 Suburban. Chose the stock style mufflers, everything bolted up and fit like advertised. I modified it some to fit up tighter to the frame, I didn't need to, but wanted to. Drives nice and quiet on the highway, sounds good at an idle. Total was $365. to my door.

Re: Stock exhaust system
 

How did you tighten up your tailpipes? Mine angle down and Im not happy with it and would like to have them "raised" closer to the frame.