The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1991 Blazers, Jimmys, and Suburbans Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=37)

- - Lets see those blazer interiors! (https://67-72chevytrucks.com/vboard/showthread.php?t=558450)

Re: Lets see those blazer interiors!

Quote:

Originally Posted by gclark1 (Post 7012648)

Those lower panels actually started out life as an OEM carpeted panel with a cardborad backing. The carpet was loose and did not fit very well. When the upholstery shop did the best they could with those pieces, they were not satisfied. They took the buckskin colored capret and the plastic vent and just built a custom panel around them. It turned out to be a unique way to make it look kind of stock and kind of custom at the same time.

Turned out awesome! Wonder if they'd make some for others?

Re: Lets see those blazer interiors!

They might. Send me a direct message and I will give you a phone number. Greg

Re: Lets see those blazer interiors!

Your interior looks a lot like mine.

Re: Lets see those blazer interiors!

Bit of a work in progress.

https://lh6.googleusercontent.com/-6...o/IMG_1103.JPG

https://lh4.googleusercontent.com/-C...o/IMG_1104.JPG

https://lh6.googleusercontent.com/-l...o/IMG_1105.JPG

https://lh3.googleusercontent.com/-S...o/IMG_1106.JPG

https://lh6.googleusercontent.com/-7...o/IMG_1107.JPG

Just replaced the seat and put the top back on for winter. Once I get the rockers repaired id like to spray the inside with a dark gray bedlinen.

Re: Lets see those blazer interiors!

See a couple of the spare wheel carriers in the back of this. anyone know where I could get the complete assembly??

Re: Lets see those blazer interiors!

Bumping this question to the top Anyone know where to get the Spare wheel assembly attachment seen in these pics????

Re: Lets see those blazer interiors!

Quote:

Originally Posted by eighteenninetytwo (Post 7073099)

Bumping this question to the top Anyone know where to get the Spare wheel assembly attachment seen in these pics????

Last time I looked LMC sold a few parts but not the whole assembly. It's a junkyard quest.

Re: Lets see those blazer interiors!

Quote:

Originally Posted by mpierce9 (Post 7059035)

How easy or hard was that install?

Re: Lets see those blazer interiors!

Quote:

Originally Posted by UKNOWME (Post 7073427)

How easy or hard was that install?

The seats?

If that's what you're asking the answer is not too bad. I used 1/4 think steel bars and matched them to the stock seat holes. Then added holes for the new seats.

I used the factor bolts to secure the brackets to the floor and 1/2" bolts to secure the seats to the bracket. Took a weekend but there was no welding involved just a lot of drilling and cutting steel bars. I didn't add a single hole to the Blazer. I will tell you that you may want to add some underside reinforcement to the brackets since now a shoulder belt will be pulling against the floor.

Re: Lets see those blazer interiors!

Are all Blazer driver seats a fixed base with only a slider? Did any flip up or have a forward folding back like older extended cab trucks?

Re: Lets see those blazer interiors!

Quote:

Originally Posted by mpierce9 (Post 7073511)

Did you take any pics by any chance? Does the rear fold forward as well as pull out completely? The passenger front seat probably doesn't fold forward though, does it? If not does it slide up enough to get in the back?

Re: Lets see those blazer interiors!

Quote:

Originally Posted by bdiamond (Post 7073703)

Are all Blazer driver seats a fixed base with only a slider? Did any flip up or have a forward folding back like older extended cab trucks?

solid/no flip as far as i've seen

Re: Lets see those blazer interiors!

Quote:

Originally Posted by UKNOWME (Post 7074209)

I took some pictures of the front and back. I'll dig them up and post them. The front does not "flip" up like the stock seat but both seat slide and tilt forward with plenty of room to get in the back. I'm 6'3" at 230lbs and I can move in and out just fine.

Re: Lets see those blazer interiors!

Quote:

Originally Posted by PEDROSKI (Post 7125470)

http://i1140.photobucket.com/albums/...psjo7o4aqx.jpg

Quote:

Originally Posted by PEDROSKI (Post 7125483)

http://i1140.photobucket.com/albums/...psxsvvmfzo.jpg

The plaid is cool eh,It looks the same as my 79

Re: Lets see those blazer interiors!

a couple random ones of my 77 chalet

Re: Lets see those blazer interiors!

before and after of the chalet top. It was nasty when I got it, completely gutted now ready for rebuild

Re: Lets see those blazer interiors!

Carpet was next but due to unemployment we are at a stand still...

Re: Lets see those blazer interiors!

Quote:

Originally Posted by slvr34c (Post 5788582)

Here's my interior. Still finishing it up

WOW thats beautiful! 77? did you get your seat covers from any of the parts magazines? how did you interpret the original color? sorry for all the questions I'm trying to finish up my 77 K5 and am having hell figuring out the original color.