1972 gmc 2wd highlander with original paint
 

This is my 1972 gmc highlander that i have been working on for a while, and i finally have the time now to post what i have done, and hope to have time to upload what i do every week.
I'm putting a 5.3 litter ls motor in it, there are pictures of it in when i brought the motor home, and when i was painting it, then another picture with it in the frame. The frame was powder coated, then i took and cleaned up all of the suspension components. While the chassis was torn down, i cut the front coil springs to lower it about 1-2 inches, and bought 4 inch drop coils for the rear (hoping that this will get the 2-3 inch all around drop that i am going for, but i may have to tweak things to get what i want). After they were all cleaned up, i put the frame and all suspension components together (picture below of my grandfather and i putting the chassis together) to make the ruling chassis. The orange and white paint on the cab and all of the body panels is the original paint, and i will keep all of it, unless i have to cut it out to fix the rust.

Attachment 1467814


Attachment 1467827


Attachment 1467828


Attachment 1467821

Attachment 1467822


Attachment 1467823


Attachment 1467824


Attachment 1467825


Attachment 1467815


Attachment 1467816

Attachment 1467817

Attachment 1467818

Re: 1972 gmc 2wd highlander with original paint
 

Sounds like a neat truck, but, none of the attached pictures are working.

Re: 1972 gmc 2wd highlander with original paint
 

oh sorry didn't realize that, give me a couple minutes while i fix it

Re: 1972 gmc 2wd highlander with original paint
 

Attachment 1467831

Attachment 1467832

Attachment 1467833

Attachment 1467834

Attachment 1467835

Re: 1972 gmc 2wd highlander with original paint
 

Attachment 1467837

Attachment 1467838

Attachment 1467839

Attachment 1467840

Attachment 1467841

Re: 1972 gmc 2wd highlander with original paint
 

Attachment 1467842

Attachment 1467843

Attachment 1467844

Attachment 1467845

Attachment 1467846

Re: 1972 gmc 2wd highlander with original paint
 

third time is the charm i guess

Re: 1972 gmc 2wd highlander with original paint
 

That's coming along! If the SPID is still on the glovebox door could you show a picture? I see your GMC was ordered with coil rear springs. Is the rear a Dana 44 or a 12-bolt?

Re: 1972 gmc 2wd highlander with original paint
 

The rear end is a 12 bolt. The frame is actually out of a chevy. The frame that came with the truck when i bought it was torn down to nothing, with no suspension components or mounts whatsoever. Plus someone at one point torched big chunks out of some pretty obvious parts of the frame. Sense we had already bought a 69 chevy to get the front suspension, we decided that it would be easier to use the chevy axle (not making it true to gmc, because gmc 2 wheel drives always had leaf springs in the rear, and chevy 2 wheel drives always have coil springs in the rear) rather than trying to track down a gmc frame that had the leaf spring mounts. Not what i originally wanted, but most people wouldn't know the difference, so i'm not to worried about it.

Attachment 1468205
Here is a picture of the truck we got for the frame

Re: 1972 gmc 2wd highlander with original paint
 

[QUOTE=kehstr;7379187] we decided that it would be easier to use the chevy axle (not making it true to gmc, because gmc 2 wheel drives always had leaf springs in the rear, and chevy 2 wheel drives always have coil springs in the rear) rather than trying to track down a gmc frame that had the leaf spring mounts. Not what i originally wanted, but most people wouldn't know the difference, so i'm not to worried about it.

My '71 2wd. GMC is coil rear susp. I've had both leaf and coil rear susp. GMC's

Re: 1972 gmc 2wd highlander with original paint
 

I think coils were an option on GMC's , and far superior in my opinion

Re: 1972 gmc 2wd highlander with original paint
 

i must just be the majority of gmc's that are leaf springs, because I've never seen a coil spring gmc, until it came to mine

Re: 1972 gmc 2wd highlander with original paint
 

Chevs came with coil springs as standard and you could order a Chev with leafs if desired. Same is true for GMC's, they came standard with leafs and you could order coils if you wanted.

Re: 1972 gmc 2wd highlander with original paint
 

Here are some pictures of the rust repair, along with my progress on my electronic speedometer conversion (here is a link for a complete overview of the conversion: http://67-72chevytrucks.com/vboard/s...d.php?t=512751) wish i had more pictures, but get to sucked in to the project at hand and forget.
Attachment 1469564

Attachment 1469565

Attachment 1469566

Attachment 1469567

Attachment 1469568

Re: 1972 gmc 2wd highlander with original paint
 

then here is a picture of the spid (hope it's readable), and some more pictures of the cab with a better camera, along with my dad's 1971 blazer in the background
Attachment 1469569

Attachment 1469570

Attachment 1469571

Re: 1972 gmc 2wd highlander with original paint
 

Progress! Thanks for the picture of the SPID. I see your truck is a super Custom

My '67 GMC project is being built on a '71 Chevy SWB coil rear chassis. Most coil rears are corporate while most leaf rears are Danas. But, I have seen coil spring Dana rears and maybe leaf spring 12-bolts (in C-models). The rarest 1/2t rear I have seen was a coil spring Dana60 6-lug.

Whoever said they think coil rear suspension is superior, I wonder in what way? For a more car-like ride? For lowering now that they are toys for many? For launching? As far as the purpose that trucks exist for, hauling/working, obviously leaf springs are superior. Not an opinion, a fact. Otherwise, why did GM go back to leaf, why were 4wds never coil sprung, and why do big trucks run leaf springs? I guess just stating you think coils are superior isn't enough info for us to get your meaning

Re: 1972 gmc 2wd highlander with original paint
 

The specific spid # is 160410, the 604 means it had gray plad, you can identify the highlander by the custom trim combination. Here is a link for the complete thread on highlander pickups. http://67-72chevytrucks.com/vboard/s...d.php?t=635040

Re: 1972 gmc 2wd highlander with original paint
 

I know all about the Highlanders. I have had several over the years. My first truck was a Highlander. I've had some that were the exception to the rule with combinations that were allegedly not available, including the first truck.

Re: 1972 gmc 2wd highlander with original paint
 

What's up with the big 4 wheel drive there in the background? Looks nice

Re: 1972 gmc 2wd highlander with original paint
 

This 1968 GMC 910 has the coil spring option plus an overloader from the factory. Wood bed, side trim but painted bumper, 307, TH400, PS, manual brakes. Weird truck. Dad drove it every day from new till his death in '96.

Re: 1972 gmc 2wd highlander with original paint
 

The 4 wheel drive in the background, is my dads 1971 blazer that he put in a LS 6.0 and a 4l80e. Then built a custom cage, and put a ford Dana 60 front end, then a semi-floating 14 bolt in the back.

Re: 1972 gmc 2wd highlander with original paint
 

Great project, and nice work on it. That's pretty cool to be able to build a truck with your grandpa and your Dad too. Your Dad's Blazer looks sweet. We need more pictures of that and the 71/72 4wd in post #6. Do you have a completion date for your truck?

Re: 1972 gmc 2wd highlander with original paint
 

If you are talking about the red and white truck in the back ground that you see the back of, then it's my dad's 72 4wd with a 454 bored over (don't know how much) and yes those are the only 2 running 67-72 trucks and blazers that my dad owns right now.
No i do not have a completion date, at this point i just want to keep it fun, and hope to have it done within the year, with shouldn't be hard at all.

Re: 1972 gmc 2wd highlander with original paint
 

Hey, 2 running 67-72's is better than most I know. :lol: And absolutely, have fun and enjoy it! The trucks I had in high school were no prom queens but they got the job done. Haha

Re: 1972 gmc 2wd highlander with original paint
 

haha, i don't need a prom queen truck right now, i got my dad's truck for that LOL