LS3 parts Cam, pushrods, valve springs
1 Attachment(s)
I have a set of LS3 factory pushrods (7.4) and valve springs with less than 150 miles on them. I also have a L99 factory cam with less 150 miles on it. I replaced the parts when I went with a bigger cam. I will take $100 a set for the valve springs and pushrods and $100 for the cam. Let me know if you have any questions.
|
Re: LS3 parts Cam, pushrods, valve springs
Hey rob,
How would this Cam do in a 5.3 LC9 Gen IV? the stock cam spec's are .467/.479-196/201 at .05 not sure the Lobe separation... |
Re: LS3 parts Cam, pushrods, valve springs
Quote:
|
Re: LS3 parts Cam, pushrods, valve springs
its a 2011 with DOD no VVT. It also has the 6L80E trans all currently stock
|
Re: LS3 parts Cam, pushrods, valve springs
looks promising rob. will this set up work in my 03 yukon 5.3 set up 4l60 dbw?
|
Re: LS3 parts Cam, pushrods, valve springs
Quote:
Quote:
|
Re: LS3 parts Cam, pushrods, valve springs
I am not sure on the 2011 LC9 but on the 4.8 I had to replace the sprocket to 3 bolt because the comp cam was a 3 bolt. So I have a singe bolt sprocket. I need to check lift and make sure it wont bring up any problems because the truck runs great just would like a little bigger cam.
|
Re: LS3 parts Cam, pushrods, valve springs
Quote:
|
Re: LS3 parts Cam, pushrods, valve springs
How was the idle with this cam? Noticeable chop or smooth? I need to check my sons truck but he has a GM reman 5.3 that he wants to swap the cam in. His truck is a 2006. If I can determine that it will work for him he would take all of it.
|
Re: LS3 parts Cam, pushrods, valve springs
Quote:
|
Re: LS3 parts Cam, pushrods, valve springs
My son says he needs a different cam so we will pass.
Thanks |
Re: LS3 parts Cam, pushrods, valve springs
bump
|
All times are GMT -4. The time now is 04:43 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com