parting a 72 blazer 4x4
 

I'll be parting it out as soon as possible. Bought this thing with only a few pics and drove 4 hour round trip was supposed to have factory tach, factory bucket seats, and factory posi, but just my luck NONE of the above ANYWAY
I'll sell the rolling chassis with body, tranny, transfer, drive lines (no top) with title or I will part it out if any interest
individual parts, $350 SOLD
single wall top a few cracks but not real bad, hatch is junk $200
front outer bumper brackets $35 plus shipping
console, couple extra holes on front-$40 plus ship-SOLD
ps pump, pulley and brackets $40 plus ship-SOLD
all motor pullies $36 shipped
ALT brackets $31 shipped
PS box $25 plus ship-sale pending
door caps-$31 shipped-SOLD
inner grill is nice $60 NO SHIP-SOLD
steering column $40 plus ship-SOLD
rear seat $60 no ship-SOLD
See anything else ask and I'll price. I'm hopefully going to start parting this Sun and Mon if the wife lets me. Thanks Randy

Re: parting a 72 blazer 4x4
 

822222

Re: parting a 72 blazer 4x4
 

877777777

Re: parting a 72 blazer 4x4
 

92222222

Re: parting a 72 blazer 4x4
 

97777777

Re: parting a 72 blazer 4x4
 

Any door caps Randy? I need a passenger side, but would take both.

Re: parting a 72 blazer 4x4
 

0100000001

Re: parting a 72 blazer 4x4
 

66666666666666

Re: parting a 72 blazer 4x4
 

How much for the tachometer, and any good blazer emblems? Eric

Re: parting a 72 blazer 4x4
 

I should ask about the 4 speed shifter for bruce. That is chrome, correct? And what is the condition of the trans case knob? Thanks.

Re: parting a 72 blazer 4x4
 

red71cheyenne, I'll check them out Sun
Toomuchstuff, Eric, I'll check those out Sun
Thanks Randy

Re: parting a 72 blazer 4x4
 

How much for the gas tank and coil shipped to 56085? Also, are the rear ends of the frame horns in good shape? I need from the rear cross member back if possible. I'm also looking for a 72 GMC pass fender and both inner fenders.

Re: parting a 72 blazer 4x4
 

How much for console and roll bar Randy? Thank you.
Posted via Mobile Device

Re: parting a 72 blazer 4x4
 

Is the transfer case shift lever chrome and in good shape? How much? I don't need the knob too much stuff is interested in.

Re: parting a 72 blazer 4x4
 

I'll take the Chrome strips that run on top of the rails between the body and hatch.
Posted via Mobile Device

Re: parting a 72 blazer 4x4
 

How much for the intake? Is the motor any good? Thanks, Daren

Re: parting a 72 blazer 4x4
 

passenger front seatbelt there? Will rear seatbelts come with the brackets they bolt to? (seat bracket) Willing to sell the hatch parts/latch/guts brackets on top separately including bolts/screws?

Re: parting a 72 blazer 4x4
 

how much for rear bumper brackets

How much for seat brackets (under the aftermarket buckets)?

Thanks!

Re: parting a 72 blazer 4x4
 

Hey Randy, looks like something I'd drag home! Last one I got that had "factory" buckets, had seats out of a 66 GTO. Dang the luck! I could use the rear top to body straps with the catches for the hatch if noboby else needs them. Thanks, Sharpie

Re: parting a 72 blazer 4x4
 

i am interested in the chrome shifter if it gets to me! also if it is for a sm465. thanks.

Re: parting a 72 blazer 4x4
 

is the wire whip for the dome lights in the top still there?

Re: parting a 72 blazer 4x4
 

Interested in:
1)Brake / Clutch pedal setup including all clutch linkages and springs , from pedal to throwout including engine ball, Zbar, frame mount, etc.
2)Rr bumper splash sheilds, I actually only need one side but I can't remember which till I can look again Mon
3)tranny hump - (4spd 4x4)

This is for a frame off, so all parts would need to be good potentials for restoration. No rush, just let me know when you get a chance. Thanks, Jeff.
Posted via Mobile Device

Re: parting a 72 blazer 4x4
 

guys I'll try to get the stuff you all are asking about off today if possible and get you some better pics. if I don't get them off I'll atleast get you all some prices
Thanks Randy

Re: parting a 72 blazer 4x4
 

Randy, I would be interested in the roll bar and console as well. What do the tires and wheels look like as well? Thanks Trevor

Re: parting a 72 blazer 4x4
 

Trevor, I have one guy ahead of you on console and roll bar but I don't know about shipping roll bar.
The 35 inch tires have good tread, but have weather cracks inside tread but hold air no problem, the wheels are supposed to be 10 inch wheels, they are not scarred up. I priced the tires and wheels to a guy here in town for $300, I don't think he has any money though. Thanks Randy