The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1991 Blazers, Jimmys, and Suburbans Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=37)
-   -   1988-1991 Suburban Wood Grain (https://67-72chevytrucks.com/vboard/showthread.php?t=839398)

rhamer88 11-01-2022 02:28 PM

1988-1991 Suburban Wood Grain
 
1 Attachment(s)
Hey guys! The short story is I have an 84 and I put the wood grain dash bezel and dash strip in out of the 88-91 Suburban, and now I would like to get moldings for the door panels that match. The problem I'm running into is that Suburban's had a short molding on the door that only runs half the length of the door panel, and no other models (that I'm aware of) came with a full-length door molding in wood grain.

So what I'm wanting to know is if any of you happen to know if there's a source where I could buy a roll of this stuff or something like that? I know it's a long shot, but figured it would be worth a shot. Thanks!

Corts60 11-02-2022 11:33 AM

Re: 1988-1991 Suburban Wood Grain
 
Quote:

Originally Posted by rhamer88 (Post 9139720)
Hey guys! The short story is I have an 84 and I put the wood grain dash bezel and dash strip in out of the 88-91 Suburban, and now I would like to get moldings for the door panels that match. The problem I'm running into is that Suburban's had a short molding on the door that only runs half the length of the door panel, and no other models (that I'm aware of) came with a full-length door molding in wood grain.

So what I'm wanting to know is if any of you happen to know if there's a source where I could buy a roll of this stuff or something like that? I know it's a long shot, but figured it would be worth a shot. Thanks!

You unfortunately are correct my friend. They didn’t bring back the wood grain until 89 and that was the first year of the last door panel change. There is no full length wood grain trim for these years. I would look up 3M wood grain products. They have a lot to offer and be the best choice in my opinion

rhamer88 11-02-2022 11:41 AM

Re: 1988-1991 Suburban Wood Grain
 
I will check that out! Thank you for the recommendation.

rhamer88 11-02-2022 01:43 PM

Re: 1988-1991 Suburban Wood Grain
 
For anyone that finds this in the future, I was able to find something kinda close to the Suburban wood grain.

https://metrorestyling.com/products/...37059548348585

Hope this helps someone else in the future!


All times are GMT -4. The time now is 02:06 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com