Re: 1990 V2500 Suburban Build Thread
It looks incredible!
|
Re: 1990 V2500 Suburban Build Thread
How many sq ft of the rattle trap did you go through to do the top and bottom?
|
Re: 1990 V2500 Suburban Build Thread
Quote:
|
Re: 1990 V2500 Suburban Build Thread
2 Attachment(s)
Today I started the engine swap on my suburban
First Pic is "PREOP" before it went into the shop. Second pic is of all the parts delivered to the shop. |
Re: 1990 V2500 Suburban Build Thread
1 Attachment(s)
Here is the after the first day of work
|
Re: 1990 V2500 Suburban Build Thread
1 Attachment(s)
Prepping the LS3
|
Re: 1990 V2500 Suburban Build Thread
Quote:
I see rolls in 25, 50, and 100' lengths pretty sure 3- 25s will not do it considering the amount of sq footage in this things |
Re: 1990 V2500 Suburban Build Thread
2 Attachment(s)
Day number two,
Got the engine and gas tank out. Changed the fuel pump and fuel sender. Also made a bracket for the Gas pedal to bolt in. I also removed all the TBI wiring. I removed the oem cross piece and put in a ORD unit and realized the ORD unit would not work with the oil pan I have but the oem one will. So I will stick with the oem one. |
Re: 1990 V2500 Suburban Build Thread
Quote:
|
Re: 1990 V2500 Suburban Build Thread
1 Attachment(s)
I have decided to not put the LS3 in and instead install this engine. Of course I need to come up with another $60K for this engine.
|
Re: 1990 V2500 Suburban Build Thread
1 Attachment(s)
Here is a picture of the complete car, This car is for sale, just $700,000.00 ( Car sold and was shipped to new owner while I was there)
It has a Shelby Serial number. |
Re: 1990 V2500 Suburban Build Thread
uuhmmm:confused: you realize that is a ford motor!:haha: that would for sure be a swap!!:eek: :lol: that is a really nice car though....:ito: :metal:
|
Re: 1990 V2500 Suburban Build Thread
1 Attachment(s)
LS3 Installed
|
Re: 1990 V2500 Suburban Build Thread
ryan,
that looks alot ..... more better!:lol: now what are you going to do for wiring?:ito: |
Re: 1990 V2500 Suburban Build Thread
Nice looking burb! :metal:
|
Re: 1990 V2500 Suburban Build Thread
Wow. This is amazing. You tear down, bodywork, paint, reassemble and LS swap your burb in the time it takes me to find a set of rear view mirrors :lol: looks incredible! Can't wait to see the finished product.
|
Re: 1990 V2500 Suburban Build Thread
Great work and beautiful burb!
|
Re: 1990 V2500 Suburban Build Thread
1 Attachment(s)
Engine is finished and last Thursday I drove the Suburban from Provo, UT to So Cal to do the "break-in" of 640 miles. I am really happy with the set up. I have been tuning the transmission and have it almost done to my liking.
|
Re: 1990 V2500 Suburban Build Thread
ryan,
looks very good & that is a heck of a break in drive!! nice job!! would you be willing to share what you did for wiring... aftermarket or ??? again nice job!! |
Re: 1990 V2500 Suburban Build Thread
Quote:
|
Re: 1990 V2500 Suburban Build Thread
Quote:
.. I ask because I am doing a LS swap in my '86 and I am trying to use the factory underhood fuse box & harness from the donor truck. I was not able to get the whole vehicle :waah: would you be willing to post pic(s) of the harness and power center by chance? |
Re: 1990 V2500 Suburban Build Thread
Great work on this gorgeous truck! Where did you get the intake tube?
|
Re: 1990 V2500 Suburban Build Thread
Here is the following list of parts I used for this LS Swap with:
NAL-19370414 Chevrolet Performance LS3 E-Rod Crate Engine CMB-03-0263 LS Fuel Filter Kit Black DAK-CRC-200-3 Dakota Digital Cruise Control Kit HLY-20-143 Holley Accessory Drive Component Mount w/Alternator and PS Pump HLY-20-133 Holley A/C Bracket HLY-21-1 Holley LS Engine Accessory Drive Kit ICB-551600 Oil Cooler Adapter SPE-900235 Spectre Air Intake Kit Dirty Dingo 73-87 4WD Chevy LS Engine Mounts Dirty Dingo E38 Gen IV PCM Billet Mounting Plate Spintech 8000 Truck RV Muffler AP Exhaust X6008 Mandrel Bent 3" tail pipe Earl Fitting 961956ERL Power Steering Fitting Earl Fitting 961961ERL Power Steering Pump Fitting |
Re: 1990 V2500 Suburban Build Thread
1 Attachment(s)
Here is a picture of the power center and ecu mounted
|
Re: 1990 V2500 Suburban Build Thread
Well since the last post I have driven the Suburban 30,000 miles and I can say the thing works great. I moved from So Cal to Utah and towed my enclosed car trailer behind the suburban every round trip.
I did lose overdrive with my 4L80E but I had one day left on the warranty for my transmission so it was rebuilt under warranty. I have really dialed in the transmission and added the Dakota Digital cruise control and it made the long trips really nice to drive. |
All times are GMT -4. The time now is 10:43 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com