A very nice restored A/T Tilt Column.
5 Attachment(s)
I have for sale a very nice restored A/T Tilt Column.
The rebuild includes a complete disassembly and inspection for worn or broken parts. This is followed by cleaning and bead blasting most parts. The Hub and Housing are powder coated on most of the time but not always. The rest of the column is then painted and rebuilt to factory specs. This includes packing and set torque to factory specs on upper bearing assembly. The lower bearing is cleaned and packed. The dust or air seal is replaced with a new one. I have the lower bearing retainer and the screws that mount to neutral safety / backup light switch re-cadmium plated. The original turn signal harness is checked using one of my trucks. It will be reused if it passes the use test. It is then cleaned and re-greased. A new turn signal harness is available on request. The column is rebuilt using new, NOS and quality used parts. Column is ready to bolt in. On automatic columns the neutral safety/backup light switch is installed and has been adjusted to match the shift indicator. No additional adjustment should be needed, just plug and play. If you want to replace the reproduction shifter arm I have a number of GM original shifter arms that have been re-chromed. All of them are high quality show chrome. I have both the standard pickup shifter as well as some out of vans which are about 4” shorter. Some owners opt for the shorter shifter based on a smaller steering wheel size. The price is an additional $50.00. The following New or NOS parts were installed: - Flasher Knob - Lower Inner Dust Seal - Upper Rubber Gasket to Dash Bezel - Lower Rubber Gasket to Firewall - Standard Shifter Arm or Short Van Shifter. Your choice. - Shifter Arm Knob - Tilt Release Arm - Turn Signal Arm - Tilt Pointer - Transmission Indicator Lens Price is $500.00 and up plus shipping to CONUS. I accept Checks, MO's and PayPal. Please include your shipping address. I will ship this via UPS or FedEx. I have several more columns to complete, so if you would like one let me know. |
Re: A very nice restored A/T Tilt Column.
2 Attachment(s)
More pics
|
Re: A very nice restored A/T Tilt Column.
They look good , great deal !!! Is the one posted 500.00 with either shifter
or are they all 500 + 50 for shifter ? How will you ship them in cardboard or wood ? Can I get a quote to 37043 ? Thanks |
Re: A very nice restored A/T Tilt Column.
Quote:
|
Re: A very nice restored A/T Tilt Column.
ttt
|
Re: A very nice restored A/T Tilt Column.
Quote to 67801 please
|
Re: A very nice restored A/T Tilt Column.
Quote:
|
Re: A very nice restored A/T Tilt Column.
If someone brought you a column, how much would you charge to rebuild it for them?
|
Re: A very nice restored A/T Tilt Column.
Do you have any gear selectors that would work with my 4l60e? Beautiful column that's my only holdback. I would even take a tilt floor shift column if you had one restored.
|
Re: A very nice restored A/T Tilt Column.
Quote:
|
Re: A very nice restored A/T Tilt Column.
Quote:
I will have a 4-speed later next month. Still need some parts for it. |
Re: A very nice restored A/T Tilt Column.
ttt
|
Re: A very nice restored A/T Tilt Column.
Would you rebuild the tilt that I have in my truck or exchange it for one you have already rebuilt? If you would exchange is there any value in the one I have as a core?
Ugly 61 |
Re: A very nice restored A/T Tilt Column.
subscribed
|
Re: A very nice restored A/T Tilt Column.
Quote:
|
Re: A very nice restored A/T Tilt Column.
Shift bowl is worn out where the gearshift pin goes through and the bottom 2 or 3 notches won't stay latched. Also need a new turn signal unit.
Gary |
Re: A very nice restored A/T Tilt Column.
Quote:
|
Re: A very nice restored A/T Tilt Column.
I'll be starting on a complete rebuild on my truck after the 1st I'll contact you when I get the column out.
Gary |
Re: A very nice restored A/T Tilt Column.
I have another tilt column ready for shipping.
|
Re: A very nice restored A/T Tilt Column.
ttt
|
Re: A very nice restored A/T Tilt Column.
ttt
|
Re: A very nice restored A/T Tilt Column.
I have a 68 gmc with a 700r4 zip 37745 short shifter price quote please .
|
Re: A very nice restored A/T Tilt Column.
Roger,
I have 2 people asking for tilt columns... Are you bringing any to the swap meet this weekend? |
Re: A very nice restored A/T Tilt Column.
Quote:
Need any vent windows. I have 2 sets ready to go. |
Re: A very nice restored A/T Tilt Column.
what would a 4 speed tilt for a 71 blazer shipped to 01720?
|
Re: A very nice restored A/T Tilt Column.
Quote:
|
Re: A very nice restored A/T Tilt Column.
I am interested in a true truck tilt . I asked for a price quote in earlier post for a 68 GMC that will have a 700r trans . Also I need some information on redoing my vent windows . If its ok ill send a pm ? thanks Don
|
Re: A very nice restored A/T Tilt Column.
Roger,
Ben Smith here. I would like to find a tilt column for my '71 short end, I know these things are getting harder to o find as we speak. I'd even spring for a good van tilt, if I could find one. The standard column I have currently has a worn out detent plate,makes finding the gears tricky if not bypassing them all together. When you restore one of these columns, do you, or have you ever had to repair these detent plates? I'm not in a hurry for one of these columns, but the 2007 Silverado seats I am using are pretty tall, makes the steering wheel end up in my lap, consequently making it hard to enter or exit the cab, so might be sooner than later. How often do you get one of these columns? I will at least have to ask the wife if I can do this, $500 is a hard sell with her... Thanks! Ben Smith :metal: |
Re: A very nice restored A/T Tilt Column.
Quote:
There are no detent plates in a tilt column. In the hub there is a piece that controls the detent. So when its in drive it stay put. I do have one restored column. The Price is $529.00. In addition to what I include for replacement parts this one includes Canceling Cam and Neutral Safety SW. Let me know. |
Re: A very nice restored A/T Tilt Column.
I am looking for a tilt column for my 72 blazer if you have one. Thank you
|
Re: A very nice restored A/T Tilt Column.
Quote:
|
Re: A very nice restored A/T Tilt Column.
Hi Roger, do you still have a restored column for sale?
Thanks, Kevin |
Re: A very nice restored A/T Tilt Column.
Quote:
|
Re: A very nice restored A/T Tilt Column.
How much shipped to 87105? Can you send photos. Oh it's for a column shift th350 automatic. Thanks
|
Re: A very nice restored A/T Tilt Column.
Quote:
|
Re: A very nice restored A/T Tilt Column.
Quote:
|
Re: A very nice restored A/T Tilt Column.
Quote:
|
Re: A very nice restored A/T Tilt Column.
Payment sent. Thanks Roger
|
Re: A very nice restored A/T Tilt Column.
Price for tilt column for 71 c10 with shorter shift arm and 4 speed indicator for overdrive. Shipped to ca 93292
|
Quote:
|
All times are GMT -4. The time now is 03:24 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com