Looking for opinions on these custom eBay door panels.
I contacted the seller and they can make them without the bow tie which is what I would want. Anyone using these? Any thoughts before I buy? Thanks guys.
http://www.ebay.com/ulk/itm/252251017233 |
Re: Looking for opinions on these custom eBay door panels.
theyre nice, id concider them if they had 67 armrests
|
Re: Looking for opinions on these custom eBay door panels.
Quote:
|
Re: Looking for opinions on these custom eBay door panels.
I think they'd look nice on a customized truck, not so much if you were going "survivor" style. Time will tell regarding durabilty. If you get some, let us know about fit/finish.
|
Re: Looking for opinions on these custom eBay door panels.
Quote:
|
Re: Looking for opinions on these custom eBay door panels.
I just got through building my own and that is a good deal. Ask them what backer they are using, just to make sure it will hold up.
|
Re: Looking for opinions on these custom eBay door panels.
Quote:
|
Re: Looking for opinions on these custom eBay door panels.
They are made with "water proof door board " It's not water proof it's water resistant . If you get a set just cover the back with plastic when you install them .Also you'll need to use the '72 escutcheons between the panels and door handle /window crank to prevent wear . I've used these door boards for many years to recreate 100's of different door panels before they went to plastic molded panels .One more thing is you want to use countersunk flanged chrome trim washers when you install the lower 4 1/4x20 countersunk screws into the door so the screws don't pull thru the pressed cardboard panels.:chevy:
http://www.manestruckparts.com/store...&Category_ID=7 http://www.manestruckparts.com/store...&Category_ID=7 http://www.clipsandfasteners.com/10_...el_p/a3472.htm |
Re: Looking for opinions on these custom eBay door panels.
Quote:
Yup as you said. They said it's made of 1/8" waterproof door board. Can you elaborate on covering the backs with plastic? |
Re: Looking for opinions on these custom eBay door panels.
Just duct tape some plastic across the back of the panel ,Heavier than a trash bag should be fine .it's just a little prevention and will help with air intrusion don't cut holes for the handles just push the handle studs thru the plastic , I have the chrome countersunk washers if you need them I can throw some in an envelope . The only thing about the design on those panels is potential wear from the window crank hitting the raised material when lowering the window . maybe you could draw your own design and have him make them for you ? Any auto upholstery shop could but not for $75.00 :chevy:
Door board $18.00 Vinyl $ 5.00 glue $ 2.00 foam $ 5.00 labor $45.00 Total $75.00 = cheap price , He lives in Mn it's a good shop time filler ebay project Total shop expenses when supplies purchased wholesale |
Re: Looking for opinions on these custom eBay door panels.
What GOM is talking about between the panel and door is known as a vapor barrier. It does just as the name implies. all car/trucks now a days are made with them to keep moisture off of the inside of the door panels. Our trucks didn't have these as they weren't needed on metal panels. And even if they did come on the truck most likely they wouldn't have made it this long to see them still left on a door. About 75% of the doors that have been into before have these thing tore all up or gone completely. Jim
|
Re: Looking for opinions on these custom eBay door panels.
Quote:
|
Re: Looking for opinions on these custom eBay door panels.
Quote:
|
Re: Looking for opinions on these custom eBay door panels.
Quote:
|
Re: Looking for opinions on these custom eBay door panels.
I think they would look pretty good without the bowtie as well.
|
Re: Looking for opinions on these custom eBay door panels.
1 Attachment(s)
Look for this guy on Ebay and on FaceBook if you like these... Im doing this set but he makes a few different designs for 67-72 trucks.. and makes glove box doors to match...
|
Re: Looking for opinions on these custom eBay door panels.
Quote:
|
Re: Looking for opinions on these custom eBay door panels.
I have my complete interior in black--just waiting for me to get there, but I think I like these better. Definitely something to consider. Im glad I saw this-----Im getting close to being out of things to blow more money on!!!!
|
Re: Looking for opinions on these custom eBay door panels.
I think they look good, Time and materials would be twice the price to DIY. Is door board what we use to call Masonite. I would coat the back with paint, or undercoating. and the use vapor barrier on the door.
|
Re: Looking for opinions on these custom eBay door panels.
They don't excite me, but beats a blank
|
Re: Looking for opinions on these custom eBay door panels.
Well I pulled the trigger and ordered a plain black pair. I also told the seller that there was a lot of interest on this site and he should think about selling them on here. I'll post updates once they're here.
|
Re: Looking for opinions on these custom eBay door panels.
I have purchased interior Items from this seller, the workmanship is good his lines are crisp and straight and the quality of the materials he uses seem to be good also.
|
Re: Looking for opinions on these custom eBay door panels.
Quote:
|
Re: Looking for opinions on these custom eBay door panels.
Were you able to just order a set? I don't see a buy now so I put a bid in on the black ones with the blue emblem
I am not really an ebay person. |
Re: Looking for opinions on these custom eBay door panels.
Quote:
|
All times are GMT -4. The time now is 03:57 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com