1968 1/2 ton shortbed stepside
 

TRUCK SOLD This has been my project for 13 years. I am selling due to the fact that I have been unsuccessful finding a bodyshop to do an all over paint job. The local shops only want insurance work. I have replaced all rust in the cab with new metal, cab corners,inner and outer rockers, outer floor sections. Front firewall smoothed and wire gutter capped off at a 45 degree angle. There is no rust left on this truck. Most of the body panels are mounted and bare steel , so nothing can be hidden. All panels are oem steel except the core support is repop. Originally a gmc converted over to chevy grill , trailing arms. Dana 44 rear has been rebuilt with a posi carrier, 3.54 gear. Running DBW 2005 5.3/4l65e swap from a 2005 avalanche with 52k miles. Vintage air kit. Hand fabricated dash cluster with autometer gauges. Completely rebuilt front suspension from a 1980 model 1/2 ton. The frame has been painted with por15. Boyds rear tank with the gas filler hidden behind the rear fender marker light. I have too many parts to list individually. I do not want to part it out. It will move under it's own power, using the e-brake. I have never bled the brake system. If you are interested call me 1-334-695-1044. My name is Brian and the truck is in Eufaula,AL. I will try to upload pics, however, I am very technologically challenged. Price is 15000 and is somewhat negotiable. If someone gave you a truck, it would take more than 15k to get it to the same point this truck is at.

Re: 1968 1/2 ton shortbed stepside
 

Surprised that there has not been any interest in this project. My pics don't do it justice. I would like to see it move on to someone that can finish it. The price is negotiable. Calls 1-334-695-1044 before 8pm.

Re: 1968 1/2 ton shortbed stepside
 

I have a friend that might be interested. PM me your bottom dollar and I'll ask him.

Rob

Re: 1968 1/2 ton shortbed stepside
 

bottom dollar 12,500. Includes every extra part i have and there is alot of them, too many too list separately.

Re: 1968 1/2 ton shortbed stepside
 

This is a bargain ! Already running/driving LS swap ? That's $10,000 right there if you have it done. Good luck with sale.

Re: 1968 1/2 ton shortbed stepside
 

Its running but not a driver. I have never bled the braking system, just use the e-brake moving it around the shop.

SALE PENDING with a co-worker

Re: 1968 1/2 ton shortbed stepside
 

Very interested in your project. Let me know if the co-worker thing doesn't pan out. Clear and clean title?
Thanks,

Re: 1968 1/2 ton shortbed stepside
 

In alabama , Pre 1975 vehicles only require a bill of sale. I don't know what would be required to register in a state that requires a title.

Re: 1968 1/2 ton shortbed stepside
 

Brian,
Thanks for the quick response. Unfortunately NM is a title for title state and it's a pain in the **s to deal with MVD when you don't have a title. With that being said, I'll have to pass on the truck which is a total bummer. :whine:

Re: 1968 1/2 ton shortbed stepside
 

Truck sold.