Re: Prostreet / Dragrace 1972 blazer
 

Well ithink are 2 builds are alittle diffrent as mine will be quite tame for its power level and should idle smooth at 900 or so. I made mine able to drive and is built for future spraying which could be fun. I ordered 10 pistons from JE when I built this and it has there blown/nitrous tool steele piston pins.
I really think it can get into the 9's without juice!! So did the converter tech at ATI. Good luck with the project. Got any pics ?

Re: Prostreet / Dragrace 1972 blazer
 

Here is my progress over the last 2 weeks. Then I loaded it up and dropped it off 2 have my 10 point rollcage welded in. The doors are jammed ppg black and this will be the whole trucks color. It should be painted in about another 2 weeks.

More progress and body work
 

I am currentley just waiting for the body work to be finished on the tub as all the other pieces have been primed and jammed PPG black. I am going to try and have this completed and in a carshow on August 2nd here in AK which typically draws around 200 quality cars. Thanks for looking and ill try and update the paint pics as they come.

Re: Prostreet / Dragrace 1972 blazer
 

does the top fit on with the cage? looks a little high in the pictures.

Otherwise looks pretty badass

Re: Prostreet / Dragrace 1972 blazer
 

Yes the top fits over the cage,there is quite a taper up from the windshield frame to the top.The cage was built by art morrison and designed for a pickup. I really should have done the cage install myself. The cage should have been mounted forward more and trimmed down the extra 5 inches that the rear floor comes up,then the rear bars would have had a lesser angle and gone further back. It still is a good fit and my seats leave me with lots of room. Thanks for checking it out.

Re: Prostreet / Dragrace 1972 blazer
 

That will be FTD = Fun To Drive!!!!!!!! :metal::metal:
Keep us posted :uhmk:
:mm::chevy::mm:

Re: Prostreet / Dragrace 1972 blazer
 

So here are a few pics of the body now.The dash,cage,and firewall along with the door jams have all been prayed. I need to hand and align the doors and front clip, then wetsand and the color can be layed out on the rest of the body. On the bright side the engine and trans are back in for good now! I am very happy with the smoothed dash and firewall.It is worth all the metal work we preformed. I will try keep the pictures current. I am planning to go 4 a ride in it in september. Keeping my fingers crossed. Thanks for checking out the progress.

Re: Prostreet / Dragrace 1972 blazer
 

couple more pics

Re: Prostreet / Dragrace 1972 blazer
 

sweet!!!!!!!

Re: Prostreet / Dragrace 1972 blazer
 

So here are some pics of the engine installed with carb and exhaust.I will try and get the doors hung and adjusted tommorow.:metal:

Re: Prostreet / Dragrace 1972 blazer
 

great build:metal:

Re: Prostreet / Dragrace 1972 blazer
 

Motor looks sweet setting in there!

Re: Prostreet / Dragrace 1972 blazer
 

That's going to haul some serious A$$!!!!

Re: Prostreet / Dragrace 1972 blazer
 

I'm diggin it. I want to build a 2wd Blazer bad!!!

Re: Prostreet / Dragrace 1972 blazer
 

:phat:

Re: Prostreet / Dragrace 1972 blazer
 

Ok well i got both doors hung and one fender off the core support. I need 2 go by shims today for the fenders and then I will line them up and check out the hood fitment. this engine has been dropped and shoved back and still sits way up. I now understand fully the term shoehorned

Re: Prostreet / Dragrace 1972 blazer
 

:metal:Here the look i was aiming for, I still need to align all the sheet metal more.I had to fit the the fiberglass hood and trim it up alittle.I am still aways off from painting the outside of the body but its looking good.

Re: Prostreet / Dragrace 1972 blazer
 

very nice!!!!

Re: Prostreet / Dragrace 1972 blazer
 

are you staying with those wheels or are you planning on going alittle wider

Re: Prostreet / Dragrace 1972 blazer
 

Still diggin' this project!

Re: Prostreet / Dragrace 1972 blazer
 

Yeah those are the biggest drag radial MT makes and I have seen people running low 8 sec passes on them.I can clear about 6 more inches if I need slick

Re: Prostreet / Dragrace 1972 blazer
 

it looks like its tucked up in there alot what are the specs on the rearend

Re: Prostreet / Dragrace 1972 blazer
 

how tall is that cowl hood and where did you get it?

Re: Prostreet / Dragrace 1972 blazer
 

Ok the rearend is a narrowed 9inch from art morrison, the rims are 15x10 and those tires are 315/60/15. I can fit up to 20 inch wide tire,and a max of 33 tall. the tires measure 13.5 wide and 29.5 tall, so there is alot of rubber under there. As for the cowl hood its a bolt on 4.5 from unlimited products fiberglass

Re: Prostreet / Dragrace 1972 blazer
 

Here is an old pic from the bed tubbing and yesterday looking at the rear end pic for you. I like how my tires are tucked in and will only go witha bigger tire for traction at the track.