GMC paul door seals are great!
 

My bodyman tried to glue on some stock type door opening seals after finishing up the paint work on my 68 and they were awful. Did not want to stick or stay in position.

I picked up a set of the push on type with metal insert inside from GMC Pauls and the are great. They took a little work to get installed (still need to pass side) but now they actually stay in place and look much cleaner,
especially the inside edge. I highly recommend this upgrade. I will try to post up some pics soon, althought I am sure there are some pics floating around here on the forum.

Thanks GMC Pauls for a great product and a reasonable price and fast shipping.

BP 68

Re: GMC paul door seals are great!
 

That's good to know because I've got a set of those laying around. Gotta get my truck back together and painted first tho. Someday....

Re: GMC paul door seals are great!
 

Hey, new (?) guy here.............

I got the Complete Cab Rubber kit from them, but it doesn't have the push on seals in kit.BUMMER!!!!!!!!!!!
It sure would help his sales if he had more pictures\better descriptions on his site.

Re: GMC paul door seals are great!
 

Good news to me too. My truck is all finished but I've shied away from the door seals. I've never bought rubber of any kind for my truck that was worth a darn.

Re: GMC paul door seals are great!
 

The door seal are one of the few things I would to go back and do again. Like a dummy I went to HomeDepo looking for some type of glue to glue on my new rubber set. The guy there told me that the Gorilla glue would work... That was the most messy stuff I have ever dealt with. The seals are glued down good, but I have some yellow dried up snot looking stains sticking up from the seals in places. Im for sure going to try some of the GMC Pauls sets.

Did the doors close good after you installed them or the doors sticking out a bit?

Re: GMC paul door seals are great!
 

no pics????

Re: GMC paul door seals are great!
 

wish i could get those shipped up to Canada

Re: GMC paul door seals are great!
 

Do the stock seals have the metal insert? or are they glued? Mine are in great shape but don't know if they can be removed and then put back

I have my cab down to the metal and I have been avoiding removing, tearing
or replacing the upper seals to paint the part behind the seals. I should do it right and replace them. thanks for the tip. easier to pull the trigger if i know the replacements fit correctly.

Not to doubt you but any noises, whistles or hisses through the doors?

Thanks Again

Re: GMC paul door seals are great!
 

Sorry for no pics, I will try to get them up soon. Been a busy and cold new year. My doors don't stick out and require about the same amout of effort to close as with factory style seals.

Re: GMC paul door seals are great!
 

i bought the same ones for my truck cant wait to have it painted where i can install them, good to hear that you like them

Re: GMC paul door seals are great!
 

Glad you like them, I think they are the best also over the glue in style. The easiest method to install them is using a rubber mallet to tap on the seal to install it, using the rubber mallet gets them to conform best to the mitered upper corner and fully seats it on the door cab seal lip. You should also cut a angle notch on either end where they meet under the door sill plates so that the cuts form a inverted /\ shape this allow air to expell from the rubber bulb seal as the door closes ( this allows the doors to close much easier than if you butt the 2 ends tightly together and doing it under the center of the door sill plates hides the cuts ) and it also allows any water that gets into the cab to drain out.
For those that order our complete cab rubber kits we offer the option in the cart to upgrade from the glue on door seals to our push on version.
In years past we intially tried using the late model truck door seals such as 88-98 or 82-93 S10 but we found the bulb seal was almost 3/16" thicker than the stock seals which mean't door adjustment & latch adjustment to get them to close well using those styles, about 3 years ago though we got with our manufacturer and came up with a similar seal as the 88-98 trucks and 82-93 S10 seals that is only apprtox. 1/32"-1/16" thicker than the stock glue on seals and since then you no longer have a problem using alot of effort to close the door fully and it eliminated the need to adjust the doors to reduce the effort involved in closing the doors.
Paul @ GMCPauls

Re: GMC paul door seals are great!
 

I've never seen these. Can they be installed,removed,and reused easily? As I recall,the '90s truck ones do,so I assume the answer is yes?

Re: GMC paul door seals are great!
 

Yes they can be installed, removed, re-installed over & over without damage to the seals.
Paul @ GMCPauls

Re: GMC paul door seals are great!
 

This type of seal sounds almost too good to be true! I tried to find them on GMC Paul's web site but it just listed the original style seal, unless I missed it. How much did a set cost?

Re: GMC paul door seals are great!
 

if i am not mistaken mine were $49.95

Re: GMC paul door seals are great!
 

Don't worry if GMC pauls doesn't ship to Canada, go to a wrecker and get Dodge Dakota push on style from the 90's, fit like a dream and waaaay cheaper. If you want new go to the dealer.
Wes and Classic Heartbeat sometimes has the push on style as well.

Re: GMC paul door seals are great!
 

This is good news, I just ordered a set. I'm going to try them out before I paint my 72.

Re: GMC paul door seals are great!
 

Great! That puts a plus on top of the other pluses. Way to go!

Re: GMC paul door seals are great!
 

Marking for reference

Re: GMC paul door seals are great!
 

You'll find them only listed on our truck weatherstrip page not on our Blazer or Suburban weatherstrip pages due to the Blazer difference on ends of seals and the Suburbans havea 90 degree corner we've never tried getting these to conform to so we don't list them for them either.
You can go to the page they are on at the following link
http://www.gmcpauls.com/Pickup.htm
Part# 2660241 $49.95 pr & $12.75 shipped priority mail insured anywhere in the USA
Paul @ GMCPauls

Re: GMC paul door seals are great!
 

I have Precision seals on my truck, and my doors are a bit hard to close. If I were to swap out to these, do you think it will make a difference in the closing pressure? Thanks

Re: GMC paul door seals are great!
 

If you have Precision glue on door seals and are having difficulty closing the doors I'd suspect that either the ends are butted tight causing the air to be trapped in the seal making door closure hard, or the doors need adjusting at either the hinges or door striker. The doors should close virtually if not exactly the same useing either our Glue on version by Precision or the push on version.
Paul @ GMCPauls

Re: GMC paul door seals are great!
 

Do you have the part # for them I looked on your web site and only found one set is that them. thanks Gary

Re: GMC paul door seals are great!
 

You'll find them only listed on our truck weatherstrip page not on our Blazer or Suburban weatherstrip pages due to the Blazer difference on ends of seals and the Suburbans havea 90 degree corner we've never tried getting these to conform to so we don't list them for them either.
You can go to the page they are on at the following link
http://www.gmcpauls.com/Pickup.htm
Part# 2660241 $49.95 pr & $12.75 shipped priority mail insured anywhere in the USA
Paul @ GMCPauls

Re: GMC paul door seals are great!
 

I need them for my jimmy but you only have them for the trucks my luck. thanks Gary

Re: GMC paul door seals are great!
 

Here are the stock glue on vs GMC Pauls.
First two are stock, last three are the new ones. Doors shut fine.

Attachment 690450

Attachment 690451

Attachment 690452

Attachment 690453

Attachment 690454

Re: GMC paul door seals are great!
 

those look great! Thanks for sharing

Re: GMC paul door seals are great!
 

Thanks for the pictures, now I know I've got to order them and get rid of my glue on ones.

BP68 noticed that the middle of the dash is smooth. Do you leave it this way?
Show us some pictures when it's ready.

Re: GMC paul door seals are great!
 

good stuff I will be needing these very soon

Re: GMC paul door seals are great!
 

SWEEEEET!!!!!!!!!!!!!!!:metal: :cool:

Re: GMC paul door seals are great!
 

Anyone have issues shutting the doors with the windows up after putting the new weather stripping on? Is this only on the 67 and 68 since they don't have door vents?

Re: GMC paul door seals are great!
 

Do you need any modification to a stock Truck to make your Weatherstrip described above to fit?
I've got a 72 GMC that is having the Interior redone as I type, and this sounds like the way to go.
LMK..............

Re: GMC paul door seals are great!
 

yes thanks for the pics , makes me glad i bought mine , looks great

Re: GMC paul door seals are great!
 

Mine are only hard to close with the windows up. If you put the window down it is like butter. Do you guys with door vents have this issue or is it just the models without? I am thinking of adding them if it fixes this issue.

Re: GMC paul door seals are great!
 

These need no modifications to install.
Paul @ GMCPauls

Re: GMC paul door seals are great!
 

JUST ORDERED MY SET TODAY!!!:metal:

Re: GMC paul door seals are great!
 

We had several people purchase these door opening weatherstrip based upon this thread and I just wanted to get the feedback from those that did regarding what they thought of the installation & finished product installed.
Thanks for any it's greatly Appreciated!!
Paul @ GMCPauls

Re: GMC paul door seals are great!
 

they look great.....in the box in my closet !! LOL

Re: GMC paul door seals are great!
 

Been away for a while. Glad I started this thread. Hope to have my truck on the road soon. Savin up for tires, picked up some wheels, getting bumpers this week. And need to fix a leaky axle seal. Then I hope to start driving around some. Interior is last phase.

Re: GMC paul door seals are great!
 

More than happy to spread the word on this GREAT product. Thanks again Paul!