67 suburban chassis all or parts
 

Take the whole roller for $350 or will chop up for parts if no takers in a week or so

Located in mesa az

Re: 67 suburban chassis all or parts
 

If you cut it up, I can use all three sets of cab/frame mounts from the front wheels and back.

Re: 67 suburban chassis all or parts
 

Is it all 4 sets of body mounts you would need?
Total 8 pcs?
Thanks
Tom

Re: 67 suburban chassis all or parts
 

I don't need the very front ones, just the 3 pairs from the front wheels back.

Re: 67 suburban chassis all or parts
 

Any word on the parts?

Re: 67 suburban chassis all or parts
 

68 panel I have those $25 ea + shipping, I can get them taken off this Monday.
Thanks
Tom

Re: 67 suburban chassis all or parts
 

Can you do $125 for the six from the front wheels back (not the front rad supports)? My zip is 60423.

BTW, I still need the parts in your other post (the driver side gas filler area and both rear marker light holes if they are in good shape.

Re: 67 suburban chassis all or parts
 

I’ll do $125 if you pull them😄

Re: 67 suburban chassis all or parts
 

If I wasn't 1600 miles away I'd buy the whole chassis for $350 :lol:

Re: 67 suburban chassis all or parts
 

Did you cut this up? I’m interested if it’s still whole and I’m local.

Thanks.

Re: 67 suburban chassis all or parts
 

I still have the complete roller
I’ll pm my phone #

Re: 67 suburban chassis all or parts
 

Got it. Will call tomorrow. Thanks.