No Limit Spy Photos
 

Spy Photos

Re: No Limit Spy Photos
 

New "NoLimit Member" jig?

Re: No Limit Spy Photos
 

Very interesting.....

Re: No Limit Spy Photos
 

Kinda Chris Alston looking,... isn't it.

Re: No Limit Spy Photos
 

New Parts

Re: No Limit Spy Photos
 

You going to offer it coilover or air bags?

Re: No Limit Spy Photos
 

your choice, we'll have both.:metal:

Re: No Limit Spy Photos
 

How long before there's a product info/marketing release?

Re: No Limit Spy Photos
 

Hopefully in two weeks. - need to make sure there ready to go. Plus, No Limit dealers get first crack at a pre-release.

Re: No Limit Spy Photos
 

Any spy photos for the rear ?

Re: No Limit Spy Photos
 

What gen is this for? 73-87?

Re: No Limit Spy Photos
 

We are working on an updated version of our Wide-Ride 3 to fit as a bolt-in for 63-72, and 73-87

Re: No Limit Spy Photos
 

probably a stupid question, but would this work on the old square body 1 tons? or is the frame a different setup on them compared to the 1/2's?

Re: No Limit Spy Photos
 

Hey Rob, do you have any of the rear sway bars for '67 - '72 coil sprung chevy c10's like the one on JT yet?

Re: No Limit Spy Photos
 

Is the spy still on special assignment ?

Re: No Limit Spy Photos
 

any updates?

Re: No Limit Spy Photos
 

The spy is wet sanding today. We are finalizing motor mount towers at this point. Complex forming is holding us up, have to make new forming dies.

Re: No Limit Spy Photos
 

update ?

Re: No Limit Spy Photos
 

Motor mount towers are done, and after a week, we're finally rested up from the Del Mar thrash. We are shooting an install this weekend, well saturday, I'll post up some on monday. Happy Easter.

Re: No Limit Spy Photos
 

tomorrow is Monday.

Re: No Limit Spy Photos
 

Will this work with the current rack & pinion set up you offer? Is there going to be control arms offered also?

Re: No Limit Spy Photos
 

This crossmember is on a bit of a different track than most. We are moving away from the C-10 components. This will be a new version of our Wide-Ride IFS, a complete IFS package including the crosmember, A-arms, coil-overs, shockwaves, or bags/shocks, spindles, brakes, power rack, and sway bar. The spindle is based on a late model Impala, with 12" drilled/slotted rotors, your choice of any 5 lug pattern, sorry, no 5 lugs yet. The track width is 63" hub to hub. Groung clearance on the crossmember is raised 2" over stock, and ride hieght, without a dropped spindle is a 4" to 5" drop from stock, and 2" drop spindles are avail. Motor mounts are included, and will fit SBC, BBC, and LS.

Re: No Limit Spy Photos
 

Looks good Rob!

Re: No Limit Spy Photos
 

Update

Re: No Limit Spy Photos
 

Is the Impala spindle taller them the c10 spindle ?