'78 Short Bed C10 Drag Truck?
 

Hey all, a buddy of mine has an old 78 short bed c10 that has been sitting off of the road for a good 3 years now and we were thinking about breathing some new life into it! It is a decent little truck and neither of us want to see it scrapped.

So what I am in visioning with this truck is something like
-Single Turbo 454
-TH400
-wide drag tires
-a locker in the rear end

I could be way off the mark with this as I have never built a drag truck, but the truck scoots as it is with a small block so I figure that should make it scoot more, There could be a better route though.

I am hoping some of you could pitch in your thoughts and ideas on the build? Any better suggestions? I'd love to hear a lot of opinions as this project is just in the ideas phase.

Thanks!

Re: '78 Short Bed C10 Drag Truck?
 

If you want to do it with less $$$$ then by a junkyard LS and a good turbo and go from there. Big blocks can get expensive and the LS has proven that it can take a beating.

Re: '78 Short Bed C10 Drag Truck?
 

Add some caltrac bars to your list

Re: '78 Short Bed C10 Drag Truck?
 

X2 on cal tracs.
And my 73 wanted both shocks leaned forward vs 1 front and 1 back

Re: '78 Short Bed C10 Drag Truck?
 

Make a budget,,
.
.
.
.
.
.
then double it,,
.
.
.
.
.
.
.
then double that. With luck that will get you to the track.
LOL, this hobby is not for the 'faint of budget' . If a part says it costs $200,,, expect $250-300 before you have the right bolts brackets, glues and lube. Then you can take a look at what that is going to cause you to have to upgrade. If you dont,, trust me the next weakest link will show it's ugly head soon enough.