edelbrock spacer
got a 72 sbc, in a 70 gmc. mostly stock maybe rv cam, it has an edlebrock performer intake dual plane and edlebrock 1405 carb. but it has a carb spacer about an inch tall. I got the intake off right now, my question is do I need to put this spacer back in. or can I just bolt the 1405 to the performer with a fiber gasket. this is not a hot rod just trying to make a good dependable daily driver thanks
|
Re: edelbrock spacer
If you dont run it you will experience carb. gas boil. Most Edelbrocks need this.
|
Re: edelbrock spacer
Quote:
Posted via Mobile Device |
Re: edelbrock spacer
thanks guys
|
Re: edelbrock spacer
Also an edelbrock air cleaner wont fit directly on an edelbrock carb without a banjo fuel fitting. the out of the box fitting on the carb will interfere with the air cleaner. Atleast all the old ones I had did. The spacer is a good thing for the reason mentioned above.
|
All times are GMT -4. The time now is 03:03 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com