Clean fuel line connection to Street Demon Carb
Anyone have any pics or thoughts for clean looking fuel line connection to a Street Demon carb?
|
Re: Clean fuel line connection to Street Demon Carb
1 Attachment(s)
I'm using the inverted flare/nut fitting sold on eBay and Summit for the Street Demon carb. Since it comes out of the carb at a low angle then 90 forward, then 90 down toward the fuel pump. Simple.
|
Re: Clean fuel line connection to Street Demon Carb
1 Attachment(s)
They make one that looks like the Edelbrock that goes forward. The problem with this one is you run a garden hose out of it, unless you get a nut and sleeve and flare the tube that heads to the fuel pump.
|
Re: Clean fuel line connection to Street Demon Carb
1 Attachment(s)
You can use a short piece of rubber and a nipple, 90 the hard line forward.
|
Re: Clean fuel line connection to Street Demon Carb
Thank you for the responses. I appreciate it.
The fitting in your first response actually came with my carb. I was thinking I might be able to utilize it. The Edelbrock looking fuel feed I found in an internet search. It's somewhat of what I was looking for, but I want my lines to be black not polished due to the overall look I'm working towards. |
All times are GMT -4. The time now is 10:00 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com