need help with transmission shifting.....
 

hey guys, i was wondering if any of yall knew what to do to make a trans. shift harder as far as kits or drilling out the valve body or what..please give details..thanks in advance.....also, the trans. is a turbo 350 that was recently built and installed before i bought my truck....jv

------------------
1972 swb, 400 sbc,
1978 malibu classic,305 balanced and bluprinted flowmasters,2 1/2 exhaust,pulleys,k/n 4" power filter,750 edelbrock carb,plus lots more......

ttt

------------------
1972 swb, 400 sbc,
1978 malibu classic,305 balanced and bluprinted flowmasters,2 1/2 exhaust,pulleys,k/n 4" power filter,750 edelbrock carb,plus lots more......

Shift kits arent hard to install. if you get a B&M or Transgo,you will have instructions on the mods. You will need an inch lb tork wrench,& some cleaning solvent(stanisol,or mineral spirits). just follow instructions,& keep things clean......69 longhorn.

thanks 69 longhorn......never really messed with the inside of a trans...neede some in put.....jv

------------------
1972 swb, 400 sbc,
1978 malibu classic,305 balanced and bluprinted flowmasters,2 1/2 exhaust,pulleys,k/n 4" power filter,750 edelbrock carb,plus lots more......