The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Suspension (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=25)
-   -   The One & Done Party!! (https://67-72chevytrucks.com/vboard/showthread.php?t=577218)

broey 05-15-2013 06:44 PM

Re: The One & Done Party!!
 
Just wanted to give a proper shout out to Royal Purple. They are hooking us up with all the lube, grease and penetrating oil we will need for the build. It's awesome to have them involved with us and the chevy truck scene as well!

broey 05-16-2013 10:10 PM

Re: The One & Done Party!!
 
Update 7(i think)

Chevy Only and C-10 club stickers will be available for purchase, Im also trying to see if Delmo has any more of his drop in shirts available for sale to bring out. so bring a little bit of spending cash if you guys want to get some swag..

Low Elco 05-17-2013 08:59 AM

Re: The One & Done Party!!
 
Maaan, this sounds like fun. Wish I could be there!

C0UCH 05-17-2013 02:21 PM

Re: The One & Done Party!!
 
I've got a family gathering in North Carolina the following day, but I'm considering bailing to make it to this! Not too far of a drive from SoCal. Still up in the air though...

Anyone know if any Porterbuilt stuff will be for sale?

Edit - Looks like I'm in + one. Both of us looking to get our hands dirty.

broey 05-18-2013 04:58 PM

Re: The One & Done Party!!
 
Quote:

Originally Posted by C0UCH (Post 6076397)
I've got a family gathering in North Carolina the following day, but I'm considering bailing to make it to this! Not too far of a drive from SoCal. Still up in the air though...

Anyone know if any Porterbuilt stuff will be for sale?

Edit - Looks like I'm in + one. Both of us looking to get our hands dirty.

awesome!!, if you need any pb stuff I would pm nate or dave and see if they can bring what you need to the party.

C0UCH 05-18-2013 05:15 PM

Re: The One & Done Party!!
 
I should have a bunch of these finished up by then too...

http://i27.photobucket.com/albums/c1...psd994c220.jpg
Posted via Mobile Device

broey 05-19-2013 10:18 AM

Re: The One & Done Party!!
 
dang thats a cool bottle opener!

broey 05-19-2013 05:19 PM

Re: The One & Done Party!!
 
gettin close and I"m ready to go!!

http://i10.photobucket.com/albums/a1...pseef4aee1.jpg

ddubbs 05-19-2013 07:00 PM

Re: The One & Done Party!!
 
Joey what rearend is that you are running? Thanks Darnell
Posted via Mobile Device

72BlckButy 05-19-2013 07:34 PM

Re: The One & Done Party!!
 
Diggin those key chains/bottle openers. :)
Posted via Mobile Device

broey 05-19-2013 09:29 PM

Re: The One & Done Party!!
 
Quote:

Originally Posted by ddubbs (Post 6079699)
Joey what rearend is that you are running? Thanks Darnell
Posted via Mobile Device

a late model camaro disk rear end. I think maybe 2000?

broey 05-19-2013 09:30 PM

Re: The One & Done Party!!
 
the guy I got it from will be at the party, He will know for sure.

Dinos63 05-20-2013 11:56 PM

Re: The One & Done Party!!
 
3 Attachment(s)
stoked !! and ready had some new art work done just in time

ddubbs 05-21-2013 01:11 AM

Re: The One & Done Party!!
 
Quote:

Originally Posted by broey (Post 6079964)
the guy I got it from will be at the party, He will know for sure.

Thanks. Been wanting to figure out what I'm going to run in the 56. PUMPED:metal::metal:
Posted via Mobile Device

broey 05-22-2013 08:14 PM

Re: The One & Done Party!!
 
Ttt!

offlimts502 05-23-2013 03:02 AM

Re: The One & Done Party!!
 
Where exactly is the address to your garage and what are the hours of this? I'm stoked to go check this out as I was just about to PM you about a few questions about building a 60-66 and now I can just do it in person.

Can't wait.

Terry

broey 05-23-2013 10:41 AM

Re: The One & Done Party!!
 
all the info is on the first page on the flyer, check it out and come on out

offlimts502 05-23-2013 12:59 PM

Re: The One & Done Party!!
 
My bad. I was looking at the last updated flyer and never went back to the front page.

Looking forward to meeting everyone

C0UCH 05-23-2013 01:45 PM

Re: The One & Done Party!!
 
How are we handling parking? Sounds like a lot of people are going to show up and the map shows the location to be residential... Is there anywhere nearby you'd like us to park or is the street out front okay?

Also, is there a rough estimate on how long this may run? Trying to plan my trip home.

broey 05-23-2013 04:33 PM

Re: The One & Done Party!!
 
Parking is going to be straight up house party style. Park where you can. Just across the street there is a long street which should have a lot of parking. And we really have no idea how long the party will last. Hoping to be done around 5pm. Really have no idea if that's do-able. We will see!
Posted via Mobile Device

broey 05-23-2013 08:38 PM

Re: The One & Done Party!!
 
Just wanted to say again... If you have eye protection and gloves bring them!! thanks

broey 05-25-2013 02:13 AM

Re: The One & Done Party!!
 
Thanks to Travis over at Pro Performance for hooking me up with the stuff to make the truck lift!! He came through way way last minute and got everything shipped to me super fast, and also knew what I needed without me having to give a parts breakdown. It's good to have someone around that knows exactly what they are selling!

broey 05-25-2013 02:14 AM

Re: The One & Done Party!!
 
http://i10.photobucket.com/albums/a1...pse00252ef.jpg

sqrlnts 05-25-2013 02:53 AM

Re: The One & Done Party!!
 
Quote:

Originally Posted by Dinos63 (Post 6082153)
stoked !! and ready had some new art work done just in time

Sweet!

C0UCH 05-25-2013 12:35 PM

Re: The One & Done Party!!
 
See you soon!

I don't want to come empty handed, aside from this little box of tools. Should we bring drinks or anything?

Posted via Mobile Device


All times are GMT -4. The time now is 09:38 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com