The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1969 - 1972 Blazers and Jimmys Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=36)
-   -   What did you do to your Blazer/Jimmy today? (https://67-72chevytrucks.com/vboard/showthread.php?t=624544)

DeadheadNM 04-10-2014 07:04 PM

What did you do to your Blazer/Jimmy today?
 
1 Attachment(s)
Pickup forum has a similar thread so why not K5's?

Had 3.73's and a front posi installed in my Blazer today and upgraded to a better shade of blue hub actuator dials.

What did you do today?

asolde 04-10-2014 07:36 PM

Re: What did you do to your Blazer/Jimmy today?
 
1 Attachment(s)
Got a spare tire carrier for my new Blazer. I cleaned it up and painted it.

DeadheadNM 04-10-2014 07:51 PM

Re: What did you do to your Blazer/Jimmy today?
 
Nice!

Chulisohombre 04-11-2014 07:19 AM

Re: What did you do to your Blazer/Jimmy today?
 
Pulled into the driveway after Work and wished I had more time To put into the old Girl. Tree fell on it during hurricane sandy so I need to get a new windshield and repair the top.

pkz71 04-13-2014 06:23 PM

Re: What did you do to your Blazer/Jimmy today?
 
1 Attachment(s)
Washed it!

briank 04-13-2014 07:52 PM

Re: What did you do to your Blazer/Jimmy today?
 
Started to patch the pass side floor, then will move to the kick panel , inner/outer rockers along with the front pillar and b pillar......then to the drivers side on my 70

DeadheadNM 04-13-2014 10:26 PM

Re: What did you do to your Blazer/Jimmy today?
 
1 Attachment(s)
Two steps forward: installed an internally regulated alternator and hooked up the auxiliary battery :)

Two steps back: discovered an antifreeze leak that tells me the heater core is bad and my fancy Oldsmobile AC compressor belt shield won't fit because of the CA emissions brackets required for the compressor :( Will post this for sale, it's a cool add

Steven B 04-14-2014 10:34 AM

Re: What did you do to your Blazer/Jimmy today?
 
Took the top off.

grillzy 04-14-2014 05:26 PM

Re: What did you do to your Blazer/Jimmy today?
 
Finnished shipping and border papers for a new ride.

DeadheadNM 04-14-2014 10:37 PM

Re: What did you do to your Blazer/Jimmy today?
 
Quote:

Originally Posted by Steven B (Post 6628103)
Took the top off.

Pics man!

Quote:

Originally Posted by grillzy (Post 6628710)
Finnished shipping and border papers for a new ride.

Congrats! Where did you finally locate one? Post pics when poss.

grillzy 04-15-2014 06:40 AM

Re: What did you do to your Blazer/Jimmy today?
 
1 Attachment(s)
Quote:

Originally Posted by DeadheadNM (Post 6629166)
Pics man!



Congrats! Where did you finally locate one? Post pics when poss.

More pictures and details once she is home. :metal:

Asphalt 04-18-2014 05:32 PM

Re: What did you do to your Blazer/Jimmy today?
 
I came home and found that UPS had dropped my LMC order....
http://i212.photobucket.com/albums/c...143622_142.jpg
Saturday should be productive.

1972 Jimmy 04-18-2014 09:50 PM

Re: What did you do to your Blazer/Jimmy today?
 
2 Attachment(s)
Removing cancer and Welding in new metal. Lets see if I can get one side done this weekend?
Attachment 1243674

Attachment 1243676

asolde 04-19-2014 07:23 AM

Re: What did you do to your Blazer/Jimmy today?
 
1 Attachment(s)
I did a tune up, changed my altenator, changed my oil. Thats my new Blazer but not my shop.

PHAT TONY 04-19-2014 09:53 PM

Re: What did you do to your Blazer/Jimmy today?
 
1 Attachment(s)
Got 2 of 4 hand-made tail light bezels done and polished.

DeadheadNM 04-19-2014 10:26 PM

Re: What did you do to your Blazer/Jimmy today?
 
2 Attachment(s)
I swapped the old RH rear CST panel for a repro and scrubbed the slider windows I was able to track down. Not sure I'm thrilled about the tint. Only set I've seen that's a factory tint - frames are black.

asolde 04-20-2014 07:44 AM

Re: What did you do to your Blazer/Jimmy today?
 
3 Attachment(s)
I wash it,then I clay bar it, then I polised it.

asolde 04-20-2014 04:56 PM

Re: What did you do to your Blazer/Jimmy today?
 
3 Attachment(s)
Then I waxed it.

timski69gmc 04-20-2014 06:03 PM

Re: What did you do to your Blazer/Jimmy today?
 
Quote:

Originally Posted by DeadheadNM (Post 6636896)
I swapped the old RH rear CST panel for a repro and scrubbed the slider windows I was able to track down. Not sure I'm thrilled about the tint. Only set I've seen that's a factory tint - frames are black.


Hey deadheadnm, where did you get the repro panel in the saddle? Just what I'm looking for.

DeadheadNM 04-20-2014 06:20 PM

Re: What did you do to your Blazer/Jimmy today?
 
Quote:

Originally Posted by timski69gmc (Post 6638007)
Hey deadheadnm, where did you get the repro panel in the saddle? Just what I'm looking for.

Those came via Brothers Trucks. I've since learned that forum member Truckseats can get these also. He's provided me with two excellent sets of covers for my pickups. Send him a PM.

timski69gmc 04-20-2014 11:45 PM

Re: What did you do to your Blazer/Jimmy today?
 
Thanks. Looks like I have some covers coming from Truckseats. Might have to increase my order.
This weekend is installing my tach cluster. Pictures to come!

Sacramento70 04-21-2014 08:42 PM

Re: What did you do to your Blazer/Jimmy today?
 
Quote:

Originally Posted by PHAT TONY (Post 6636840)
Got 2 of 4 hand-made tail light bezels done and polished.

What was the process of making those and what materials did you use. I like them alot, very cool idea and surprisingly innovative that looks stock :metal:

PHAT TONY 04-21-2014 10:30 PM

Re: What did you do to your Blazer/Jimmy today?
 
I made patterns out of box board, took em to a shop that water jetted them from 3/16 aluminum, sand sand sand and polish. More work to the lenses to make them fit just right though. Thank you for the compliment; my Blazer is full of little things that took MAJOR time and effort that you have to point out to people if I want them to notice.

dialric 04-22-2014 08:59 PM

Re: What did you do to your Blazer/Jimmy today?
 
5 Attachment(s)
Got the rear floor finished in the Blazer 2WD

87Skier 04-23-2014 04:07 AM

Re: What did you do to your Blazer/Jimmy today?
 
1 Attachment(s)
I pulled my broken SBC 400, to start a rebuild.


All times are GMT -4. The time now is 07:33 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com