The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960-1966 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=7)
-   -   CO Parting 65 Longbox Stepside (https://67-72chevytrucks.com/vboard/showthread.php?t=809941)

robbieg454 08-01-2020 09:36 AM

Parting 65 Longbox Stepside
 
3 Attachment(s)
ok so here is what i have left
Good solid hood has hail damage
stake bed pockets
i have a complete cab no doors speedo (non Gauge) heater core assy the cab is way too rusty to salvage
i have 2 trans missions i have a completely rebuild 420 never ran and a 3 speed 218 in good condition. i have the original 230 that runs good but leaks oil. i have a 12 bolt 3.07 open rear
HD over load springs and trailing arms. All the glass and door mechanicals.
solid cowl sheetmetal
Have the pick up floor braces.
mirrors
3on the tree column
6cly frame mounts and original motor mounts
brake parts no cables just the mechanism mounted to the farm
also have a farm left over that is rusty but somewhat useable.
please send me your number with any parts i don't have listed and i will call you back and get you pictures. I don't want to ship the big items due to cost but will assist you in any way to help. my number is 701five2zero99four0 no texts just call thanks

1960chevypanel 08-01-2020 01:20 PM

Re: Parting 65 Longbox Stepside
 
Price on motor mounts? Also interested in overload springs depending on pics and price.

65 GMC 08-01-2020 02:24 PM

Re: Parting 65 Longbox Stepside
 
How much for the 3.07 12 Bolt rear axle?

roll_the_dice 08-01-2020 05:25 PM

Re: Parting 65 Longbox Stepside
 
How much for the mirrors?

robbieg454 08-01-2020 07:01 PM

Re: Parting 65 Longbox Stepside
 
1 Attachment(s)
Mirrors 75 shipped
Springs 75 shipped
Motor Mounts 50 shipped
Read end 150 no shipping
Donít really know what this stuff is worth sorry about no prices

1960chevypanel 08-01-2020 07:22 PM

Re: Parting 65 Longbox Stepside
 
Thanks, do you have the contact plates for them? The axle u-bolts go through them.

robbieg454 08-01-2020 07:41 PM

Re: Parting 65 Longbox Stepside
 
Yes I believe so I will get them off and take a picture tomorrow

65 GMC 08-01-2020 07:52 PM

Re: Parting 65 Longbox Stepside
 
Where in Colorado are you located? I'm right in the middle of Kansas.

1960chevypanel 08-01-2020 07:57 PM

Re: Parting 65 Longbox Stepside
 
Quote:

Originally Posted by robbieg454 (Post 8785534)
Yes I believe so I will get them off and take a picture tomorrow

Ok cool, I'll take them pending a pic. Can you do $100 shipped for the springs and mounts?

robbieg454 08-02-2020 10:10 AM

Re: Parting 65 Longbox Stepside
 
1 Attachment(s)
Ok so only got one off the other was cracked and someone welded it to the trailing arm. Iím in south Colorado Springs in fountain.

robbieg454 08-02-2020 02:09 PM

Re: Parting 65 Longbox Stepside
 
3 Attachment(s)
I have 2 good master cylinders. One square one round both worked but old
60 each includes shipping also have the original trans shields. 60 shipped. Thanks

jrusher 08-03-2020 01:08 AM

Re: Parting 65 Longbox Stepside
 
I will take mirrors if still available. Thx

robbieg454 08-03-2020 08:59 AM

Re: Parting 65 Longbox Stepside
 
PM sent

1960chevypanel 08-04-2020 03:11 PM

Re: Parting 65 Longbox Stepside
 
Quote:

Originally Posted by robbieg454 (Post 8785812)
Ok so only got one off the other was cracked and someone welded it to the trailing arm. Iím in south Colorado Springs in fountain.

Can you cut it off with an angle grinder without damaging it any more? If so I can clean it up and repair it. I don't think I can use the springs without that.

robbieg454 08-04-2020 06:39 PM

Re: Parting 65 Longbox Stepside
 
2 Attachment(s)
Got the brackets off one looks great the other is useable but needs work.

1960chevypanel 08-06-2020 02:11 PM

Re: Parting 65 Longbox Stepside
 
Ok cool, thanks for doing that. PM me your payment info and I'll get it squared away. Also let me know if you can do a package price with the motor mounts.

jrusher 08-15-2020 12:31 PM

Re: Parting 65 Longbox Stepside
 
Hi rob . Was just wandering if mirrors shipped ?

sofilofi 08-23-2020 06:26 PM

Re: Parting 65 Longbox Stepside
 
1 Attachment(s)
Hi do you still have this bracket?

robbieg454 08-23-2020 09:39 PM

Re: Parting 65 Longbox Stepside
 
Yes I still have it


All times are GMT -4. The time now is 09:24 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright 1997-2020 67-72chevytrucks.com