Modern step bumper for 72 fleetside?
Hello all,
I am looking for a decent looking step bumper for my 72 fleetside 4X4. Does any body know of any good sources or what other years or makes will fit? I have pretty good fabrication and welding skills so I am not to worried about the stock brackets, just a bumper that is the right length and body contour.. Thanks, Mark |
Re: Modern step bumper for 72 fleetside?
I used a step bumper from a 76.....bolted right on my 67 with no problems...Sid
|
Re: Modern step bumper for 72 fleetside?
i've looked into this myself. the main problem is all the plastic that they put on them these days. the best looking one i found at least in my opinion was actuly on a ford. i think it was a 98 but that's a guess.
|
Re: Modern step bumper for 72 fleetside?
Stomper
I've got an 88-89ish on my 67. Fits pretty good, but I don't personally care for it. I was just figuring out how to get rid of it. Let's figure out how to get it to WI!!!!!!!!! It's painted white by PO |
Re: Modern step bumper for 72 fleetside?
2 Attachment(s)
I have a step bumper on my stepside and I don't think it looks bad. Better than the factory mammoth that Chevrolet put on them.
|
Re: Modern step bumper for 72 fleetside?
Hey Mudder, nothin' wrong with that stepper that I can see.
Just to clarify,the bumper I want to get rid of is the OE type late model. It's more contoured. With some mods to the brackets, it may fit better than it does now but I've got the "correct" OE chrome for my short fleet. If ya'll want pics let me know and I'll pull it out of the garage and get some tomorrow. |
Re: Modern step bumper for 72 fleetside?
1 Attachment(s)
I have the same style that Mudder does on my longbed. Good quality and easy install. Available from most parts dealers, and the cost was not that much from what I remember (it has been on about 5 years now).
|
Re: Modern step bumper for 72 fleetside?
Quote:
|
Re: Modern step bumper for 72 fleetside?
Thanks GUYS,
GOOD lOOKIN TRUCKS, But what Im trying to do is get away from that chrome Diamond plate look. I want somthing a little more modern looking that will match. Our 67-72S ARE WIDE MERFERS!! I will probally buy a newer OEM GM step bumper(boneyard) , saw in half and add the extra 2+ inches in the center.Ill recover with that stupid piece of plastic... Maybe I found my ticket?????????:bling: SOMEONE FINALLY MAKES A GOOD LOOKING STEP BUMPER 4 67-72 FS C You all on E-Bay.... Love, Mark, & Miller & AA:blah: :blah: :blah: :blah: :blah: |
Re: Modern step bumper for 72 fleetside?
Im, working on it right now....98 chevy FS rear step bumper....too narrow right??? I added 4" to the middle...Hold tite...Ill post procd....and pics...
|
Re: Modern step bumper for 72 fleetside?
FEY (Westin) have other models than the diamond plate version that Mudder67 and barn9 shown in the pics. for the record, I have the fleetside version on my stepside and it does stick way out.
http://www.westinautomotive.com/page...-overview.html |
Re: Modern step bumper for 72 fleetside?
1 Attachment(s)
This came on the 69. I am not sure what it came off of, but it will be the bumper. I think it looks good and it gives me something to step pn when I need to get up in the bed.
|
Re: Modern step bumper for 72 fleetside?
Anybody know of a source for an unpainted step bumper to fit a 71 fleet?
Joe |
Re: Modern step bumper for 72 fleetside?
believe it or not i've been satisfied over the years buying step bumpers from JCWHITNEY i've had a couple on different trucks good quality reasonable prices
|
Re: Modern step bumper for 72 fleetside?
Has anybody tried to use a sport bumper from a late 70's truck on our trucks it looked similar but I am guessing that it is too narrow.
|
Re: Modern step bumper for 72 fleetside?
Quote:
BTW this was on a fleetside truck. |
All times are GMT -4. The time now is 05:46 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com