parting out 76 GMC sierra classic
 

parting truck out, has lots useable, besdies body parts.
-
Hood is very nice though, no rust, one very -very minor ding, gray.
-good hinges $15,

-straight auto column $30,

-a/c parts cheap,

-rear slider cab glass $25,

-door parts cheap,

-engine brackets, mounts $15 pair

-auto trans crossmember $16

-72"(without yoke measured) one-0piece driveshaft for th350 and 12 bolt, $20

-3.40 ratio 12-bolt axle whole or gear-set only

-wiring harness, for a/c $30

-Leaf spring packs, $35 each
-Front control arms $25 each
_p/s steering box $30
-sway bar and brackets $40
-power steer pump and brackets $35

-Spindles, centerlink, calipers crossmember, etc package deal, cheap, for disc brake conversion..
Other parts, ask.



------------------
© 2001 Randy
Lincoln, IL

Current fleet:

-'77 Electra 403Olds/TH350, for sale $750, have pics, gold ext/tan interior, 4 door clean, one minor rust hole, very loaded car.

-'76 GMC C-1500 Sierra Classic 350 4-bolt/TH350, 3.40 ratio
-'68 C-10 frame, 3.73 axle, disc brake front, trailing arms(all for sale)
-'72 K-5 4x4 rolling chassis, will soon be super-shorty(SS) truck.



<A HREF="http://communities.msn.com/RandyR72K5]http://communities.msn.com/RandyR72K5[/URL" TARGET=_blank>


[URL=http://communities.msn.com/ChevyTrucksforever/_whatsnew.msnw]http://communities.msn.com/ChevyTrucksforever/_whatsnew.msnw</A>

r72k5@hotmail.com

i know it has a very good taillamp housing http://67-72chevytrucks.com/board/ubbhtml/biggrin.gif
hehe
does it have the clock in the dash?

Lol, Blue!

yeha does have clock in dash, actually, hehe.

how much for the bezel and gauges? which gauges work or do all?pleeeease tell me the clock works

Dont know what works or doesnt, came from a runnig 76 3/4 ton, sell whole dash for 20 with wood grain bezel, plus shipping. Lemme know if interested stil or I can just leave it in the truck, hehe

[This message has been edited by Fast68Chevy (edited 06-24-2001).]

fast...

How much to ship me the 72" 1 pc. drive shaft, at 74429 zip?
And that does include the tranny yoke, right?

------------------
ken
OK
'69 C/10 LWBowtie
maybe a daily driver, some day...

"Life is not too short, it's just that eternity is so long."


[This message has been edited by gotta69bowtie (edited 06-24-2001).]

This is front a 76, right?
You say you have AC parts cheap. Do you have the compressor mounting brackets?
What about the trim that goes above the glove box that has the two air vents in it?
DO you have tan seatbelts in it?
Email me at kyu4@netzero.net
-- Mike

------------------
73 k20 6" lift 33's SM465 NP205 350
ORD this and that everywhere
Got a spare Dana60 lying around?

I recieved and replied to yur email Mike.

Ken, shipping is 13.50, it is under 108" total inches, so its fine to ship regular parcel post.