metal to wood boards shorter?
 

I am going to put a wood bed over my steel bed in my 1972 factory SWB.Are the boards shorter than stock boards? my concern is for tailgate clearance. TY

Re: metal to wood boards shorter?
 

What boards ? You got the boards already ?

Re: metal to wood boards shorter?
 

I have not seen a wood over steel bed, but the boards should the same length, as the tailgate drops in behind the bed surface. The wood will make it taller than the tailgate when open, but the same length should work.
Hope that answers your question, and post a pic when you're done!
Jim

Re: metal to wood boards shorter?
 

Have you seen Show Beds? They lay on top of your steel floor on a frame and can be removed in no time. The cross braces lock like your fingers in a prayer position if that makes sense. Seen this on Stacy Davids Geazs TV show.It looked to be about 3/4 inch thick.With thetailgate up you could not tell it was not stock.

Re: metal to wood boards shorter?
 

-
If money is no object you could always install a "Showdeck" system over the steel floor....

http://www.horkeyswoodandparts.com/page2.php

LockDoc

Re: metal to wood boards shorter?
 

Ty