The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1969 - 1972 Blazers and Jimmys Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=36)

- - Top off (https://67-72chevytrucks.com/vboard/showthread.php?t=806215)

Ptjsk

05-14-2020 12:23 AM

Top off

I took the top off and the windshield off the Jimmy so I can finish the paint.

Of course, sanding the windshield frame is taking some time.

On the very top of the windshield....the drip rail around the front appears to have some sort of body seam sealer on the very top of it.

I have taken out the most of it, but I'm pretty sure I need to fill it again. Is that what you guy's suggest?

Thanks, Pat

BobbyK

05-14-2020 01:34 PM

Re: Top off

use a 3M urethane seam sealer. Good stuff!
I used this stuff.

https://www.napaonline.com/en/p/MMM0...3m+seam+sealer

You can find way cheaper online

.

Ptjsk

05-14-2020 10:35 PM

Re: Top off

Quote:

Originally Posted by BobbyK (Post 8739109)

use a 3M urethane seam sealer. Good stuff!
I used this stuff.

https://www.napaonline.com/en/p/MMM0...3m+seam+sealer

You can find way cheaper online

.

Thanks Bobby! Do you use a lot of it to fill the "gutter" or just a small amount?

Pat

BobbyK

05-15-2020 10:10 AM

Re: Top off

I ended up using enough to make the bead about 3/8"-1/2" wide when smoothed out.

Ptjsk

05-16-2020 01:35 AM

Re: Top off

Quote:

Originally Posted by BobbyK (Post 8739646)

I ended up using enough to make the bead about 3/8"-1/2" wide when smoothed out.

Cool! That's what I did.

Thanks again,

Pat

All times are GMT -4. The time now is 01:36 PM.