Re: What did you do to your Blazer/Jimmy today?
 

Vinyl wrapped the door panel inserts.

Re: What did you do to your Blazer/Jimmy today?
 

Those look great!

Re: What did you do to your Blazer/Jimmy today?
 

X2!!! They look great. Did you take pics of the process?

Re: What did you do to your Blazer/Jimmy today?
 

Not complicated at all. Just used a prepsol to clean the inserts. Back of the vinyl has grids to make measuring easier. Cut to length and width. Removed the top 1 1/2 of the backer and attached all the way across the top. Then worked the vinyl from the larger area to the smaller area. Used a firm squeege to get air bubble out as you move along. Make sure the vinyl is tight against both sides of the raised perimeter detail and use a brand new razor blade to cut the vinyl off the top of the detail. Use the center of the razor blade and hold almost horizontally. I did each of the six perimeter sections one at a time. Making sure the vinyl was attached well and used 3-4 razor blades.

Re: What did you do to your Blazer/Jimmy today?
 

Damn fine work! I appoint you the new Cheyenne Superman - how much for a set of panel inserts? :)

Re: What did you do to your Blazer/Jimmy today?
 

Awesome work!!! Man-I really want a center console like that; bet they're rare as hens teeth, huh?

Re: What did you do to your Blazer/Jimmy today?
 

Not really. They are out there. Check your local K5 Facebook pages or marketplace. I had an extra one just sold to a member here.

Got some satin black on all the seat brackets and air cleaner assembly. Would have more pictures but had to pack up early because of another thunderstorm.

Re: What did you do to your Blazer/Jimmy today?
 

Where did you get the vinyl? Thanks

Re: What did you do to your Blazer/Jimmy today?
 

Thank you, SoCoC10! What type of dough should I expect to shell out (don't want to hijack the thread-can PM if preferred).

Re: What did you do to your Blazer/Jimmy today?
 

Here's a screenshot of the vinyl I used. Took a month to get it.

simicrintz I PMed you

Re: What did you do to your Blazer/Jimmy today?
 

Cool, thanks

Re: What did you do to your Blazer/Jimmy today?
 

3M di noc is what I used on my wagoneer worked out very well
https://www.amazon.com/s?k=3m+di-noc...l_6evfwr4oxw_e

it is rated for marine use so good in the sun and water uv.

Re: What did you do to your Blazer/Jimmy today?
 

Getting closer

Re: What did you do to your Blazer/Jimmy today?
 

Did you remember to install those foam thingys between the cowl and upper fender?

Re: What did you do to your Blazer/Jimmy today?
 

Had a 71-72 GM accessory cruise master cruise control installed. See the button under the dash.

Re: What did you do to your Blazer/Jimmy today?
 

Welded lower shock mounts on my 14BFF and finished cleaning and painting the rear frame while it's exposed

Re: What did you do to your Blazer/Jimmy today?
 

That's awesome! Time to pack it up, put it to the test and get it out on the road!

Re: What did you do to your Blazer/Jimmy today?
 

Wipers, wiper arms, antennae, grill assembly and front bump installed.

Re: What did you do to your Blazer/Jimmy today?
 

That blazer looks amazing. You're doing a fantastic job!

Re: What did you do to your Blazer/Jimmy today?
 

Have tried it yet. That's cool

Re: What did you do to your Blazer/Jimmy today?
 

Looking great!

Re: What did you do to your Blazer/Jimmy today?
 

Thanks guys! Butt-oning things up. Installed the gravel guards, bumper brackets, license plate bracket and rear bumper.

Re: What did you do to your Blazer/Jimmy today?
 

Looking great....

Re: What did you do to your Blazer/Jimmy today?
 

Sorry Dale I missed this. Not yet. Still at the shop getting a few other tweaks like an odometer swap, choke adjust, and slider windows: http://www.musclecarrestorations.com...Blazer-72-001/

Re: What did you do to your Blazer/Jimmy today?
 

Troy- Blazer looks fantastic. Great job.

Pete...sliders look outstanding. Died when I saw the antenna ball in the first pic.