Cheapest way to remove old bondo. IDEAS?
I'm getting ready to start the teardown process and strip all the old paint and mud off the truck and I don't have a compressor yet so how can I get started to remove some of the thicker areas of mud/paint?
|
Re: Cheapest way to remove old bondo. IDEAS?
Electric grider with a paint buster disk. Harbor fright
|
Re: Cheapest way to remove old bondo. IDEAS?
Quote:
|
Re: Cheapest way to remove old bondo. IDEAS?
yea, if you have a angle grinder, put a flapper disk on it and tear it up. actually it won't tear it up much, but it should take it down to bare metal really fast unless you have a bunch of dents. just be sure to wear a dust mask and stay out of the wind.
|
Re: Cheapest way to remove old bondo. IDEAS?
Yea thats what I thought. I need to get a bigger angle grinder and I can get my hands on some 60 grit at work. Thanks
|
Re: Cheapest way to remove old bondo. IDEAS?
do you have access to a flame........burn it off and then take a scraper and it'll break right off
|
Re: Cheapest way to remove old bondo. IDEAS?
I prefer the wire wheel on the angle grinder. It rips through the bondo & doesn't load like sandpaper.
|
Re: Cheapest way to remove old bondo. IDEAS?
Quote:
|
Re: Cheapest way to remove old bondo. IDEAS?
Got the truck in storage building just in time for all this great weather were having in Kansas and will be getting started in the next couple of weeks. I'm in the process now of getting the wood floor out of it and the tailgate off and on stands then the bed... I'll get some pics tomarrow of the start...
|
All times are GMT -4. The time now is 11:11 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com