The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- 4x4 Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=141)

- - lifts.. again (https://67-72chevytrucks.com/vboard/showthread.php?t=634105)

I'm restoring my 1972 GMC k25. It currently has 35s on it and only rubs when flexing a lot but the fenders are cut a little. It doesn't have any lift but it has HD springs so I'm thinking that's why its able to clear 35s. When I put new quarter panels on it will rub and I don't want to cut fenders. Im thinking of going with a 4 inch lift but I've read that it might rub some too. What brand would allow the most clearance? Would a 1-2 inch body lift require a bunch of other modifications? I would like to stay away from a 6 inch lift due to all of the extra mod$ required.

Re: lifts.. again

I have a 4" lift on a 72 K20 and I run 35 x 12.5's on a 10" wide rim with no rubbing issues whatsoever. I would think you would be okay with 4" of lift.

Re: lifts.. again

Thanks! What brand is your lift?

Re: lifts.. again

Hello, Can you upload some pic's of our K20?