The 1947 - Present Chevrolet & GMC Truck Message Board Network - This part needed if doing a vintage air conversion?

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - This part needed if doing a vintage air conversion? (https://67-72chevytrucks.com/vboard/showthread.php?t=805940)

msg	05-09-2020 10:33 AM

This part needed if doing a vintage air conversion?

1 Attachment(s)

Before I restore this part and buy new hardware, I think its not needed after deleting the heater box for the Vintage Air conversion right? Or no?

cwcarpenter98

05-09-2020 11:10 AM

Re: This part needed if doing a vintage air conversion?

I think that piece is there in an attempt to keep trash and debris out of the air box. If you are just using a block off plate there, you don't have to restore that piece if you don't want to.
My 63 does not have the heater box on the outside. I don't think my truck has that piece

Heater63

05-10-2020 05:52 PM

Re: This part needed if doing a vintage air conversion?

correct, that is a water/debris diverter for the old heater. You won't need it.

msg	05-10-2020 11:35 PM

Re: This part needed if doing a vintage air conversion?

Thanks fellas, Ill keep it with the heater box parts and store it way.

All times are GMT -4. The time now is 12:58 AM.