widen the rear and front fender ???
Hello together....
on many sides you can see and buy the widen rear fenders for a chevy pu 47-53.... Had anyone ever tried to widen the front fenders ?? I think it would be a great stance with widen front and rear fenders.. Thanks Achim |
Re: widen the rear and front fender ???
Quote:
|
Re: widen the rear and front fender ???
you are right ....i just have seen fiberglass fender in this style..
achim Quote:
|
Re: widen the rear and front fender ???
These guys have fiberglass rear fenders but I don't see any fronts on their web site. I had actually thought about splitting the fenders and adding a section but decided against it.
http://www.superiorglassworks.com/19...uct-flyer.html Bernie |
Re: widen the rear and front fender ???
you could get fenders from a one ton. They're wider, but the wheel openings are larger. But maybe you could graft the halfton openings onto the one ton fenders? I've never seen it done, so I don't know if it's possible. Just a thought.
|
Re: widen the rear and front fender ???
1 tons are not wider on the 47-55 trucks. You have to go to 1 1/2 tons to get them wider. I've swapped them from 1 tons to the 1/2 tons and vice versa with no issues. 1 1/2 tons are 4" wider but are also 4" longer with a different hood because they go up higher on the cab as well. Did BEEP ever get his 'Burb sorted out with those fenders he spliced?
|
Re: widen the rear and front fender ???
WIDE BODY C10!?!?!?! Shades of DTM!!! Can't picture it but I see a wing in the bed lookin like bleachers!!! Just need a German motor and a 110 point roll cage!!
|
Re: widen the rear and front fender ???
All kiding asid is it possible to stretch fat fenders like mini tubs? Take two fenders, cut the amount out of the middle of one the width you want, split the other in half and weld it all together.
Welche Größe Reifen planen Sie installieren? Was schauen willst du denn? |
Re: widen the rear and front fender ???
Quote:
thanks for your answers ....your germans sounds pretty good. At the moment i have no clue which combination i will drive. I just would like to see any pics.... May i will do that project in the future.. Thanks Achim |
Re: widen the rear and front fender ???
i saw a thread or link here somewhere with some guys widening the fenders and cab to fit a frame they made for a corvette suspension. but I can't find it now. Rats. iwas thinking about a low mean road racer look
|
Re: widen the rear and front fender ???
Quote:
|
Re: widen the rear and front fender ???
Quote:
i just wanna see some pics of a truck type 3100 with widened front fenders.. compared to a ford f100 , a chevy truck is very small....so a truck with widened fenders would get a more aggressive appearance as the F100. Regards achim |
Re: widen the rear and front fender ???
Do you mean F1s ('52-back) or later F100s ('53-up)? 3100?? You are wanting to see '47-1st Design GMs and earlier,right? I posted a thread with a 4wd truck that has widened fenders this morning. They're probably wider than you're thinking. I like them as they were made,personally.
http://67-72chevytrucks.com/vboard/s...d.php?t=478917 Edit: Never mind. I just read it all back over and see where my confusion comes from. This thread is in the wrong message board. |
Re: widen the rear and front fender ???
Quote:
maybe a admin person can move the thread into the right board thanks achim |
Re: widen the rear and front fender ???
Quote:
|
Re: widen the rear and front fender ???
Quote:
|
All times are GMT -4. The time now is 03:35 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com