|
Re: Father / Daughter ’70 Short Bed Resto…
Dads 31 Ford
Thanks Harley03joe :smoke: :smoke: :smoke: http://i259.photobucket.com/albums/h...20-%20Copy.jpg |
Re: Father / Daughter ’70 Short Bed Resto…
Do you have issues with your clear lifting/adhesion if you are letting your base coat harden before applying? Just curious as I never wait long in between.
|
Re: Father / Daughter ’70 Short Bed Resto…
Quote:
So once completely assembled, I will be hitting the surfaces with a 1200, shoot one last base coat to ensure an even layout and then final clear. Thanks for the question.:ito: |
Father / Daughter ’69 Short Bed Resto…
2 Attachment(s)
Still working the wiring and 50...other tasks at once. Almost done with the harness install tho....running all engine compartment components as welll....yea, a lot going on. :metal:
March 17 |
Re: Father / Daughter ’70 Short Bed Resto…
2 Attachment(s)
Early April-
Made good progress this weekend. Sound deadener and heat shield installed. Progress hot n heavy with the wiring. |
Re: Father / Daughter ’70 Short Bed Resto…
So i decided to now fab my sub enclosure behind the seat where the tank was...being that I don't have my helper any more to assist in putting the bench in, can anyone out there by chance know and share the measurements from the rear cab wall to the back of the seat adjusted mid way? Thanks in advance.:ito:
|
Re: Father / Daughter ’70 Short Bed Resto…
5 Attachment(s)
Here we are the day before Thanksgiving 2019!
HAPPY THANKSGIVING TO EVERYONE OUT THERE!!!! Well I’m still tinkering with my project...my biggest problem is that I can’t leave well enough alone. So now I’m tearing up the engine compartment again to dress it up with chrome. I’m also going to try a serpentine belt conversion. I’ll let you all know ho that goes. Yes I have taken her out for a Maiden voyage, but that’s not the full scoop. Posting some pictures on where I’m at. Posted via Mobile Device |
Re: Father / Daughter ’70 Short Bed Resto…
Looking good!
|
Re: Father / Daughter ’69 Short Bed Resto…
5 Attachment(s)
Hi all and Happy New Year to one an all!!!!
Her is an update to my engine compartment dress-up and Serpentine Belt Conversion: Took a few tries to get the correct bracket an configuration I was shooting for but I believe I’m there.... So here is my starting point: :mm: Attachment 1972856 Attachment 1972857 And next...some Progress!!!!! :metal: Attachment 1972862 Attachment 1972863 Attachment 1972864 |
Re: Father / Daughter ’69 Short Bed Resto…
4 Attachment(s)
And lastly the result: :uhmk:
Okay, I am still working on the fan system...but it’s cold in the garage!!!! |
Re: Father / Daughter ’70 Short Bed Resto…
Looking good! Nice and clean in there.
|
Re: Father / Daughter ’70 Short Bed Resto…
Nice work
|
Re: Father / Daughter ’70 Short Bed Resto…
Thanks!!!
|
Re: Father / Daughter ’70 Short Bed Resto…
Thanks again!!!
|
Re: Father / Daughter ’69 Short Bed Resto…
2 Attachment(s)
Got the fans put in now. Looks great finished. Fired her up and off to start swapping the steering column now!!!! Yup, putting the chrome column from CPP in...I’ll post pics in a bit on that.
For now here is the top view with the fans in a bit: |
Re: Father / Daughter ’70 Short Bed Resto…
Man, I have to say that an LS engine and that aftermarket air sure remove clutter from an engine bay!
|
| All times are GMT -4. The time now is 03:22 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com