New Top, Brush Guard, and License Bracket
5 Attachment(s)
Want to start out by thanking Bigeasycigars for selling me his hard top. The top was in very nice shape, no cracks in lift gate, has sliders, and an original hatch handle with key! Not only did he sell me the top for a fair price, but he fed me lunch (pizza), and he and some of his friends helped move the top out of storage and mount it to my Blazer. He is a true stand-up guy. Wish everyone I dealt with was so cool.
Anyways, shot some pics of the top on my truck, my new (old) brush guard I got from another board member, the flip up license plate mount that I got to work with my Sidewinder winch install, and some pics I like to call "Big and Small". You will see why. Enjoy. |
Re: New Top, Brush Guard, and License Bracket
5 Attachment(s)
More...
|
Re: New Top, Brush Guard, and License Bracket
2 Attachment(s)
Last..
|
Re: New Top, Brush Guard, and License Bracket
Very nice!:metal:
|
Re: New Top, Brush Guard, and License Bracket
Wow - I dig them both!!!!!
|
Re: New Top, Brush Guard, and License Bracket
Wow, that front bumper winch is sweet! How did you do up the bumper to clear it? Cool big and small too:lol:
|
Re: New Top, Brush Guard, and License Bracket
Sweet dude. I love the sliders. Good job!
|
Re: New Top, Brush Guard, and License Bracket
It doesn't get much better. A driveway full of classic American Iron. And it happens to be one of my favorite colors.
|
Re: New Top, Brush Guard, and License Bracket
I like it all, esp. the sliding window and winch, good job! Looks great!
|
Re: New Top, Brush Guard, and License Bracket
Diggin' your truck(s). I sure wish I had those sliding windows
|
Re: New Top, Brush Guard, and License Bracket
You lucky SOB! I wanted that top too! Your truck looks great! I really dig the vintage prepared 4x4 look.
|
Re: New Top, Brush Guard, and License Bracket
That is a really nice k/5. I was wondering what mine would look like with the sliders on it. Let's not overlook the seller, lets give props to him for being such a great person.
-Bob |
Re: New Top, Brush Guard, and License Bracket
Great pair!!! And hats off to Bigeasycigars and his buddies.
The 5 is about set up perfect. I need to learn more about the sliders and winch set up. What lift hieght and size tires are those? You've got it perfect. |
Re: New Top, Brush Guard, and License Bracket
Looks really good with the top... clean up front too - nice job.
|
Re: New Top, Brush Guard, and License Bracket
I love the Bronco! Just had to say it.
|
Re: New Top, Brush Guard, and License Bracket
Red71Cheyenne - The winch is an old 70's era Hickey Sidewinder. It fits up between the engine crossmember and the front bumber with minor trimming of the bumper. I fabbed up the mount, as I could not locate an original one made for a Blazer.
Big Block - I love ochre too. I don't choose my trucks by what color they are, but rather what I just happen to find. I really wanted a hugger orange Blazer, but came across mine 15 years ago and fell in love. Bouncytruck - The sliders are great. Allows passenger in back seat to get more air, and really keeps the interior cooler when cruising in the high desert with the front windows down too. Kind of comes in the front windows and goes out the sliders without causing a lot of tubulence. Shiner - I don't know much about the sliders other than they were an old aftermarket item. They open like pick-up truck rear window sliders with 4 panes of glass each, and can be locked when closed. The winch is a Hickey Sidewinder as mentioned above. I run 6-inch Superlift springs all around, but I get a little more lift out of the 14 bolt rear and D60 front due to bigger axle tubes. Removed one leaf out of each of the front springs to soften up the ride and lower the nose a bit. Tires are 35x12.50x16.5 Parnelli Jones Dirt Grips on old 9.75x16.6 steelies. Jtrux - The Bronco is my daily driver. I rescued it from its original owner a couple years back, brought it back to life, and now just use it as it was intended - a utility vehicle. It was essentially rust free being from Southern California. Its a great little truck with a 302 and 3 speed manual on the tree, but I far prefer the Blazer for long road trips/exploration. |
Re: New Top, Brush Guard, and License Bracket
Quote:
|
Re: New Top, Brush Guard, and License Bracket
Quote:
|
Re: New Top, Brush Guard, and License Bracket
1 Attachment(s)
I was looking at boats on CL and noticed this K5http://losangeles.craigslist.org/sfv...920628928.html with sliders too....Check it out!http://losangeles.craigslist.org/sfv...920628928.html
|
Re: New Top, Brush Guard, and License Bracket
ive got sliders off as double wall top but want to install them into a single wall top. has anyone done this and can i use a regular single wall glass seal? thanks in advance!
|
Re: New Top, Brush Guard, and License Bracket
Your Blazer has had several different looks over the years and all of them looked great. I really like this one.
|
Re: New Top, Brush Guard, and License Bracket
Wow. Another old thread back to life! Yeah the Blazer has seen a lot of changes. Those pics in 2010 were taken a year before I decided to cut all the cancer and crappy bodywork hiding under the diamond plate and replace it all with OEM steel. Did it all before my first son was born in 2011 and never committed to getting the paint done. I still say I'm going to paint it every year. But I use it too much to take it out of service. I consider its current mismatched/primered appearance to be a theft deterrent!
|
Re: New Top, Brush Guard, and License Bracket
Sorry, man, I didn't notice it was a resurrected thread. I still love the way your Blazer looked back then. I have to say, though, I admire how you make your Blazer your own.
|
Re: New Top, Brush Guard, and License Bracket
looks great.
|
Re: New Top, Brush Guard, and License Bracket
Quote:
Quote:
|
All times are GMT -4. The time now is 07:40 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com