Mechanical clutch hole in floor for push rod
I put a mechanical pedal assembly in my 88k5.
I was wondering if someone can give me a measurement of where the hole for the pushrod that goes through the floor is located.been searching for hours and calling everyone.but nobody has a mechanical setup.thanks. |
Re: Mechanical clutch hole in floor for push rod
There should be a flattened out recess in the floorboard for it...we had this discussion not to long ago here and I added pics...I'll have to search for it..
Here it is...http://67-72chevytrucks.com/vboard/s...ghlight=Clutch |
Re: Mechanical clutch hole in floor for push rod
Quote:
|
Re: Mechanical clutch hole in floor for push rod
If you need something more specific, I can measure if you need it
|
Re: Mechanical clutch hole in floor for push rod
I just covered mine, but these may help you in finding the correct location.
https://i.postimg.cc/bw0PFwZM/74866-...532-DE52-D.jpg https://i.postimg.cc/Y90w9NdK/B7497-...74-EAB5-A1.jpg |
Re: Mechanical clutch hole in floor for push rod
2 Attachment(s)
Quote:
Got it working.i had to make that bracket that the zbar bolts to.people are asking too much for that little bracket. |
Re: Mechanical clutch hole in floor for push rod
2 Attachment(s)
Flipped you pics
|
Re: Mechanical clutch hole in floor for push rod
Quote:
|
All times are GMT -4. The time now is 04:32 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com