The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Cleaned a few visors (https://67-72chevytrucks.com/vboard/showthread.php?t=817419)

CG 01-24-2021 06:24 PM

Cleaned a few visors
 
2 Attachment(s)
I had a thread over in the general section on what’s a better product than Armor-all? Something called 303 came out as a favorite. I finally bought some and decided to give it a try. Figured I would use some Simple Green with a rag and a soft brush for initial cleaning and then some 303.

Grabbed a handful of visors out of my stash, tossed em on my bench and couldn’t find my Simple Green. But I did find this gallon of Mr Clean stuff I got for a buck at work.

It did a nice job overall. I decided to grab my heat gun and see if I could work out a few of the “divots” in the visors while I was at it. Heat gun helped, but I didn’t get them totally smooth like I wanted. Next I added a coat of the 303, and I think they turned out pretty decent.

special-K 01-24-2021 06:44 PM

Re: Cleaned a few visors
 
Those look nice. I'll have to try that 303.

CG 01-24-2021 06:49 PM

Re: Cleaned a few visors
 
2 Attachment(s)
Did the arm rests on my C30. Like everyone was saying, no “greasy” feel.

LockDoc 01-24-2021 06:52 PM

Re: Cleaned a few visors
 
Quote:

Originally Posted by CG (Post 8869260)
Did the arm rests on my C30. Like everyone was saying, no “greasy” feel.

Those came out good Mark. I will have to pick some of that stuff up if I can find it around here.

LockDoc

Getter-Done 01-24-2021 07:01 PM

Re: Cleaned a few visors
 
Nice :metal:










.

dagnabbitt 01-24-2021 07:12 PM

Re: Cleaned a few visors
 
Definitely going to try that stuff on my armrests

Stocker 01-24-2021 08:40 PM

Re: Cleaned a few visors
 
Lookin' good, Mark. I've been using 303 for years -- though not as often as I should! :o

truckster 01-24-2021 10:26 PM

Re: Cleaned a few visors
 
It looks like it works really well. I just replaced my dash pad - I might have to get some to keep it looking new.

68bowtie 01-24-2021 10:56 PM

Re: Cleaned a few visors
 
Looks great! Never heard of 303, thanks for sharing.

dmjlambert 01-24-2021 10:59 PM

Re: Cleaned a few visors
 
That looks great. The thread has deteriorated and visors split open on my truck. I think they would be fine if resewn. Have you ever done that and if so, how do you find the appropriate thread?

70LonghornCST 01-24-2021 11:12 PM

Re: Cleaned a few visors
 
Wow! Do they make a facewash? ;) Nice job!

lil hoodlum 01-25-2021 02:17 AM

Re: Cleaned a few visors
 
As others have stated, those came out great. Thanks for the heads up on the 303. I'll look for some too for my interior pieces.

CG 01-25-2021 06:49 PM

Re: Cleaned a few visors
 
1 Attachment(s)
Cleaned the last three I have here at the house. They turned out nice too. The one in the middle didn’t have an arm on it and there were remnants of a factory visor sticker. I had to pull out the Goof Off for that one. It’s not as nice as the other two.

I still have a pile more stashed away I need to dig out. I’m tired of the browns, maybe I’ll see how blue cleans up =)

CG 01-30-2021 11:34 PM

Re: Cleaned a few visors
 
3 Attachment(s)
Grandson (8) called the other day and asked I had anything he could do to earn some money. He came over today and helped me go through some of the stash of truck parts. Then we came home and I set up his bench for visor cleaning.

One very close to being finished (unsure what the color is called), it started out as bad as the blue one did. And the blue one before and also close to being finished. He did a pretty darn good job in my eyes.

LockDoc 01-31-2021 12:49 AM

Re: Cleaned a few visors
 
Quote:

Originally Posted by CG (Post 8872461)
Grandson (8) called the other day and asked I had anything he could do to earn some money. He came over today and helped me go through some of the stash of truck parts. Then we came home and I set up his bench for visor cleaning.

One very close to being finished (unsure what the color is called), it started out as bad as the blue one did. And the blue one before and also close to being finished. He did a pretty darn good job in my eyes.


They both look good. Tell him to come to Iowa, I have about 30 of them he can do...:)

LockDoc

CG 01-31-2021 03:13 PM

Re: Cleaned a few visors
 
Quote:

Originally Posted by LockDoc (Post 8872483)
They both look good. Tell him to come to Iowa, I have about 30 of them he can do...:)

LockDoc

Thanks Leon, if only he was a tad taller he could reach the pedals better in the little red race car and I could send him on his way =)

MAC71Cheyenne 01-31-2021 03:46 PM

Re: Cleaned a few visors
 
So just how much stuff do you have Leon? LMAO!

LockDoc 01-31-2021 05:19 PM

Re: Cleaned a few visors
 
Quote:

Originally Posted by MAC71Cheyenne (Post 8872762)
So just how much stuff do you have Leon? LMAO!


A lot.... You posted in the thread where I posted all the pictures of my junk....:)

LockDoc

LockDoc 01-31-2021 05:27 PM

Re: Cleaned a few visors
 
Quote:

Originally Posted by CG (Post 8872739)
Thanks Leon, if only he was a tad taller he could reach the pedals better in the little red race car and I could send him on his way =)


I can wait till spring Mark. Maybe he will be taller by then....:)

I usually use Simple Green for cleaning my visors and door panels then hit them with the pressure washer. I use a wide pattern tip so the spray isn't so concentrated. Works pretty good. So far I haven't found the 303 stuff. That's the problem with living in a rural area.

LockDoc

CG 02-03-2021 09:35 PM

Re: Cleaned a few visors
 
1 Attachment(s)
Finished the ones I could find that were saveable, pretty sure I have another few pairs somewhere.

CG 02-06-2021 05:04 PM

Re: Cleaned a few visors
 
1 Attachment(s)
Oh boy, try to control your excitement (heh) I did find some more.

best view 02-06-2021 05:53 PM

Re: Cleaned a few visors
 
U guys have a visor fetish lol

DeadheadNM 02-06-2021 06:45 PM

Re: Cleaned a few visors
 
1 Attachment(s)
You guys are a bad influence

CG 02-06-2021 07:08 PM

Re: Cleaned a few visors
 
Quote:

Originally Posted by DeadheadNM (Post 8876134)
You guys are a bad influence

Oh nice! You stepped up and bought the cleaner. I just used cheap cleaner I got at work and used the 303 Protectant for the final coat. Let us know how well it works.

CG 02-06-2021 09:49 PM

Re: Cleaned a few visors
 
1 Attachment(s)
Pulled the visors out of my C30. Drivers side pristine, passenger side had a mirror clipped to it.

Pulled the door panels and headliner out too. I’ll start a new thread for door panel and headliner refurbish =)

EDIT: Boy they almost look black in the picture, they are actually dark green.


All times are GMT -4. The time now is 11:33 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com