Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

I would like to know if anyone has purchased a NEW hood for their 64-66 C-10.
If so, from where? and how was the experience?
I want to buy one, and I realize that some work may be needed to obtain a good fit, but I already plan on welding up the seams anyways.
Please feel free to comment with experience and/or opinions!

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

I personally have not but there was a thread on here about them it seemed they were pretty decent one thing about the hood the only thing it has the lineup against his the calvent

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

I appreciate your comment, but I didn't quite understand the last part of it.
Can you elaborate?
Do you know where I can look for the thread?

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

Pretty sure "calvent" was a typo or iPhone auto correct. I'm sure he means "cowl vent."

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

I believe he meant

“ only thing it has to line up against is the cowl vent”

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

Oh, Thanks!
I think that I get it now!
Thanks for the help guys!
I would still really know who makes or supplies the best hood though!
Or, does everybody just sell the same hood?

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

There are only a couple overseas manufacturers of aftermarket replacement body parts. I would imagine the hood is made/marketed by Key Parts/Tri Plus, but I could be wrong?

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

Thanks for clearing that up y’all I should probably read what I say a little closer AutoCorrect can get you in trouble I don’t know who’s thread it was on the hood or the maker Like the captain said I don’t think but a couple places are making the

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

My suggestion is to find a retailer close to you, go look at what they have in stock. If you decide to order, look that dude over real well, take measurements of a stock hood with you to compare. Good luck!!

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

Ha!
I wish it were that simple!
It appears that everyone (Brothers, Classic, and most likely LMC) gets these hoods from Auto Metal Direct in GA. so, I can't just run over there and look one over so easily. But everything that I have read in different forums state that their quality levels are superior to the rest of the market. I was just really interested to see if anyone on our forum had any personal experience.
Has anyone used any replacement parts from AMD? (Auto Metal Direct)

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

I'm not going to answer in hopes of seeing larger font in the future. :lol:

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

funny....LOL!

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

Modges'66
I have not purchased one.
The guy I buy my parts from said everyone
really likes the new hoods.
I realize this is not in your area.
Thought you would like to hear this feedback possibly .
Below is a link to There face book page & below that is the
comment about the New hood.


https://www.facebook.com/Hueysclassicautopart/

November 13, 2018 ·
...
1966 chevrolet truck hood in stock for $789.
I have sold several of these hoods now and they are great fits.
Pick up at my shop and save shipping.
This will fit any 1960-1966 GM truck. 931-752-5657

.

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

Thank you sooooo much for the info!
I left a post on their facebook page requesting more info.
We will see where this goes.
Thanks again!

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

From what I hear everybody talking about the doors the hood and the fleet side beds fit very well now if they can get the front fenders rocker panels etc to fit as well lol

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

I got new doors, fenders, bed they fit good.

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

Fenders to thay usually don’t fit well mine didn’t

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

Attachment 1872432

Attachment 1872433

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

Attachment 1872434

Attachment 1872435

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

You got lucky I think mine were triplus i’m sure that spelled wrong Where did yours come from

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

I was involved in one thread about the new hoods. At the time I would have bought two (had the money) but the guy at Nsanerodz (I think) would not post a good picture to show how well they lined up. He either took a low shot or one where the hood was up. You could not tell how well they lined up with the cowl, so I did not buy. (Bare in mind that not many companies will stock them- he wouldn't at the time). So I bought a used one for my 66 project that I am about to get to work on. While I am using him as who I have dealt with, I am not trying to pick on Nsanerodz- probably a good guy, I don't know.

Would really love to see a repro on a truck, though.

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

I saw some of the pictures he posted on here of his Front fenders and how well they fit Like his was better than anybody’s but did the same thing as with the hood never a good shot or after he had worked on it and filled the gap‘s with seem sealer the best part was when he left the LMC cartons in the photo LMAO I think a lot of people realize that I don’t see them on here anymore

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

I didn't see, but what brand are the parts that you bought?
I am really trying to narrow things down to a brand/supplier name for the hood that I want to purchase...I really appreciate any and all info that has been posted!!!

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

Well Guys!!!
I pulled the trigger and ordered a new hood from Auto Metal Direct....The company that seems to be the Supplier/Importer of what appears to be the hood that everybody offers for the 62-66 pickups.
I figured that I would just order it from them directly, rather than ordering it from someone else and getting a hood that has been shipped all over the place before finally getting to me.
I will keep everybody posted on my experience with this endeavor...

http://www.autometaldirect.com/amd-h...k-p-19477.html

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

The link shows out of stock.

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

LOL hopefully he got the last one

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

Ha-Ha-Ha!!!
Well, I must have gotten the last one!
I checked the tracking info on Friday, and It said that it had been delivered already....
I had previously informed ALL of the employees in the shipping area of the shop to NOT sign for this package, and to come get me to inspect and sign for it, so I knew that it couldn't be delivered already......

Then I saw this box in the shipping dock!

https://imagizer.imageshack.com/v2/1...923/BH4Kkj.jpg

With this gaping hole in it!!

https://imagizer.imageshack.com/v2/1...924/RVfHx5.jpg

I was instantly furious that somebody signed for this item, and I was immediately on the phone to see what I might be able to do about it!!!
I already knew that I wouldn't have any recourse, but I thought it was worth a try....
It drove me crazy all day long, as I was waiting on a response from the shipping company before opening the package.

It turns out that the puncture hole in the box was to the underside of the hood. Had it been on the opposite side of the box, the hood would have definitely been damaged.

Here are some pics upon inspection...

https://imagizer.imageshack.com/v2/1...921/2P1kZ9.jpg

https://imagizer.imageshack.com/v2/1...923/FZRKb6.jpg

Needless to say, I have looked it over really good, and I am impressed with how straight and flat that this thing looks!!!
The hood will get some finishing touches during the next few weeks/months, but I will probably move the progress to my build thread soon.

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

Glad to hear that you received the hood undamaged. That could have been bad, had that damage to the box been on the other side. Upon your initial inspection, how does the seam across the front look?

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

Nice looking hood the Captain was wondering about the seam in the front I was able to inlarge the picture and it looked like it was a good fit now you need to try it on the truck let us all know how it fits nice looking shop what do you make there

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

Wow, that's pretty. Wish that was available when I got my hood. I had to get the upper and lower front sections from LMC and have them replaced. Would have been lots of money ahead buying that believe me. You scored. :metal:

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

Attachment 1877521

Attachment 1877522

Attachment 1877523

Hi All!

New to this forum and love it, wish I had found it sooner...

Just mocked up my new LMC hood last week, it fit unbelievably well, I also have new inner and outer fenders as well....

Joe

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

That's it rub it in.
No really, I'm happy to hear it fits. It's about time we hear from someone on this. Thanks :)

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

I am soooo glad that I did't have to deal with a messed-up hood! I already bought one used hood that didn't turn out to be what I was looking for!...I didn't need a second fail!
The seam along the front looked as good as the O.E. hood seam. I don't have any pics, but I was impressed with the quality level....If that's what you like.
I really don't care for the seam, and have already started the process of welding it up!...More to come on that!

Thanks! Like I said above, it looked & mated-up great

I totally understand! I didn't want another hood to fix! I just wanted a hood that matched the quality level of the rest of the truck!

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

I realize that you purchased the hood from LMC, but who made it?
Was there a logo on the box?...Just curious.
The hood looks great BTW!!!

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

Modges66, here is the carton with the info...seems to be real similar to the AMD hood....

Joe

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

I noticed that both boxes say GM16051A. Am I correct by guessing it is the same manufacturer?

By the way, both of those hoods look great

Re: Has Anybody Purchased a New Steel Replacement Hood for their '64-'66???
 

surprising the aftermarket retooling has a positive comments

most i read about the aftermarket is; that they dont fit, needing adjustments ( as in cutting and welding them up to a line ), or they just tossed them because it was just junk from the start

glad that they came out well and anyone that has purchased it are pleased with them