49 chevy 5 window, resto mod - on air w/patina
Hi folks,
I am new to the American iron scene, but not new to building cars. I wanted one of these AD trucks for a while and had recently finished building a VW bus and was looking for another project. https://i.imgur.com/lDHNIVA.jpg I decide to create this thread to post progress and ask questions about things that are new to me. Thanks in advance. :D After finding a REALLY clean and dry truck from North Dakota in Nov of 2019, i went and looked at it in person and bought it. As i bought it (Nov 2019): https://i.imgur.com/UB8B8Qe.jpg Delivered: https://i.imgur.com/6WNBmfF.jpg The (1957 Canadian Pontiac 261 with 848 high comp head): https://i.imgur.com/pzRgWhG.jpg 1974 Nova 10 bolt 8.5" rear end (3.08 for cruising): https://i.imgur.com/Md1BCVr.jpg started to take it apart: https://i.imgur.com/ZxxJpy1.jpg Pulled the body off: https://i.imgur.com/lVLFKiC.jpg bought a Turbo 350 (TH350) Auto Trans, ordered the langdon trans adapter kit (Great kit! Bought the starter locally because of international shipping costs and those starters are dirt cheap), installed a Mustang II IFS and brake upgrade. it was a generic kit and was pretty tricky to install (get the geometry correct) https://i.imgur.com/0lVordy.jpg installed a Mustang2 IFS and rust paint-matched it, also fabbing up engine mounts for the inline 6: https://i.imgur.com/7kenJLa.jpg https://i.imgur.com/0lVordy.jpg trimming the inner fenders to clear the IFS and engine mount supports https://i.imgur.com/YVJCIBB.jpg https://i.imgur.com/fwzKfXg.jpg https://i.imgur.com/zg0Nvzr.jpg https://i.imgur.com/CamBRyf.jpg installed dual 8" MC and smaller trans cooler (i live in Canada): https://i.imgur.com/1ppxZ7y.jpg |
Re: 49 chevy 5 window, resto mod - on air w/patina
Looks like a good solid start..!!..
|
Re: 49 chevy 5 window, resto mod - on air w/patina
Looking forward to following your build
|
Re: 49 chevy 5 window, resto mod - on air w/patina
oh a roll, get after it!
is that a Westy? that would be really good fun, looks awesome. |
Re: 49 chevy 5 window, resto mod - on air w/patina
Looks like a great start so far....
Marc |
Re: 49 chevy 5 window, resto mod - on air w/patina
Great looking project with perfect patina. Great progress so far. Steve
|
Re: 49 chevy 5 window, resto mod - on air w/patina
modified the battery tray to hold a big-old 12v and fabbed up a hold-down bracket
https://i.imgur.com/fDMbgRo.jpeg https://i.imgur.com/XMcLnJR.jpeg |
Re: 49 chevy 5 window, resto mod - on air w/patina
set the engine angle at 2.5 degrees down
https://i.imgur.com/xbCPtck.jpg fabricated the rear trans hanger. i used the stock one and modified it quite a bit. trimmed off the bottom so it didn't hang down. Goal to have lowest point = running boards pulled the bed off. i was surprised how fast this went. took like 6 minutes! https://i.imgur.com/upD1Kn8.jpg https://i.imgur.com/pVeyvRO.jpg https://i.imgur.com/GslUrWT.jpg unbolted the stock rear suspension / drive line and rolled it out of the way https://i.imgur.com/jIbuRwS.jpg |
Re: 49 chevy 5 window, resto mod - on air w/patina
figured out the driveshaft. needed to sort out a combo ujoint. not really an easy way to do that other than measure and hunt rock auto.
this driveshaft had those stupid plastic inserts, so getting the OG ones out was a PITA. all done combo ujoint to fit the Nova rear end: https://i.imgur.com/tW8VGIR.jpg polished up the nose shaft w/1000 then 2000 grit wet dry https://i.imgur.com/UKunKFQ.jpg |
Re: 49 chevy 5 window, resto mod - on air w/patina
Thanks for making the effort to show us your build.
Great to see an inline 6 build. Looking forward to the progress. Actually I'm addicted to following all the AD builds, better Than any t.v. shows! |
All times are GMT -4. The time now is 02:21 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com